Blew a head gasket

[KTD SC]

Hey guys, my car has been detonating and loosing antifreeze latly and i pulled the spark plugs, and did a leak down test and came to the conclution that my HG's are blown.

Im gona start to fix it on my own in about 2 weeks. I already ordered the head gaskets, but i was woundering what other gaskets and things i would need to do this on my own. Im assuming new intake gaskets, and exhaust manifold gaskets... but what else?

any extra input would be extremely helpfull

thanks
-ken

 

[95CobraMike]

new head bolts or head studs
a tube of silicone
maybe thread loc for the header bolts (unless you have aluminum heads)
razor or something similar to scrape the old gaskets off
new antifreeze
i usually do 2 oil changes after doing HG's first one let it warm up and then change it to get all the antifreeze out of the oil and the second batch stays in
hummmmm cant think of anything much else right now..

 

[DFG 5OH]

are you sure its the head gaskets? I have had the SAME problems lately, LOTS of detonation and losing coolant. I got a thing to check and see if my head gaskets are blown...i'll be doing that tomorrow. BUt my oil is not milkey...

 

[loudpedal99]

BUt my oil is not milkey...

Could just be leaking into the chambers and being burnt; any white smoke??

 

[DFG 5OH]

Could just be leaking into the chambers and being burnt; any white smoke??

sometimes at WOT, and always with tons of pinging

 

[KTD SC]

my oil isnt milky ether, but white smoke does come out at WOT and i did the leakdown test... so im positive the HG's are blown