• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

blew another (%(*## dimmer switch.... anybody know the anatomy of these??

  • Thread starter Thread starter noslow5_0
  • Start date Start date Apr 27, 2004
N

noslow5_0

New Member
Nov 7, 2003
422
0
0
dallas tx.
Apr 27, 2004
#1
  • Apr 27, 2004
  • #1
well now that i have four bad dimmer switches, i was thinkin of takin a chance an fixin them.... there looks like just a resistor that keeps blowing on them. Anybody know how to take em apart??? im thinkin of just busted the rivets out. But back to my blowning dimmer switches. I put a good one in, works for about an hour then the instrument panel lights flicker an shut off.... None of this happened till i hooked up the light for my fuel pressure guage, an someone said that i may have disturbed something that was on its way out. Any suggestions???
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 27, 2004
#2
  • Apr 27, 2004
  • #2
i would trace the light wire for the FP gauge. or disconnect it and see if you can keep the dimmer working. you might have a short, which is frying the dimmer.
often, the illumination wire for the stereo (if equipped) is not used and touches metal. cig lighter lighting can do it too....but since it started after your gauge install, that is where i would look.

good luck.
 
N

noslow5_0

New Member
Nov 7, 2003
422
0
0
dallas tx.
Apr 27, 2004
#3
  • Apr 27, 2004
  • #3
well after i did it the first time, i un hooked the f.p. guage light, an got another dimmer switch... that one lasted about an hour, then as im about to pull out of the driveway it went out... on to the third one. Just like the second one worked great for awhile... went to go to the parts store an no instrument lights came on. On to the fourth, which worked fine till i went to leave the guys house whos paintin my car.... so i came home all pissed off an what not.... crawled under the dash to test the fuses an they all checked out... just went again for a second look, an sure enough i dont know how i missed it, but a blown fuse.... replaced it, an dimmer's workin great at the moment... i dont want to use it too much though, cause ive gotten to the point where im tired off messing with it... next im just gonna pull the dash out an look for any fraid wire....
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 27, 2004
#4
  • Apr 27, 2004
  • #4
when you pulled the wire for the FP gauge light, did you disconnect it at the gauge, or where you tapped power (i.e. the hdlt switch connector or fuse 13).....? if the former, the wire could have a chafed spot and short. im sure you thought of that, but thought i would toss it out. when i get sick of something, i tend to forget simple ideas.

you could just rewire the dimmer circuit and ditch it.

i have no other ideas...good luck.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 28, 2004
#5
  • Apr 28, 2004
  • #5
The innards of the dimmer switch are a wire wound coiled resistor element and a wiper that makes contact with the coiled resistor element. Not much of anything to repair.

The dimmer is burning up because there is too much current flowing through it. You have probably figured that out by now, so it is definitely time to look for reasons why it is pulling too much current.
 

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Apr 28, 2004
#6
  • Apr 28, 2004
  • #6
A word of caution. On my car, if the dimmer is acting up and the dash lights are out, as it does when adjusted right before the click to turn on the dome light unless I wiggle it, the tail lights go out also. A cop let me know about that problem!

Good luck tracing the problem.
 
N

noslow5_0

New Member
Nov 7, 2003
422
0
0
dallas tx.
Apr 28, 2004
#7
  • Apr 28, 2004
  • #7
well i dont know why it is doing this, but now its blowing fuse 13... Im about to say the heck with it, an just rewire it.... thanks!!!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 29, 2004
#8
  • Apr 29, 2004
  • #8
jrichker said:
The innards of the dimmer switch are a wire wound coiled resistor element and a wiper that makes contact with the coiled resistor element. Not much of anything to repair.

The dimmer is burning up because there is too much current flowing through it. You have probably figured that out by now, so it is definitely time to look for reasons why it is pulling too much current.
Click to expand...
Big J, where do you come up with this stuff?
(that is a compliment).
 
You must log in or register to reply here.

Similar threads

Electrical Dimmer Switch
  • Wayne Waldrep
  • Dec 4, 2021
  • Fox 5.0 Mustang Tech
Replies
5
Views
1K
Fox 5.0 Mustang Tech Dec 4, 2021
Wayne Waldrep
C
64 1/2 gen issues
  • corvairbob
  • Jul 29, 2023
  • Classic Mustang Specific Tech
Replies
0
Views
621
Classic Mustang Specific Tech Jul 29, 2023
corvairbob
C
What in gods green earth happend to my N/A 2.3?
  • Piranahbite
  • Mar 24, 2024
  • 2.3L (N/A & Turbo) Tech
Replies
8
Views
2K
2.3L (N/A & Turbo) Tech Jun 1, 2024
Piranahbite
J
Electrical No power at ignition switch
  • JohnnyJ721
  • Mar 9, 2020
  • Fox 5.0 Mustang Tech
Replies
0
Views
1K
Fox 5.0 Mustang Tech Mar 9, 2020
JohnnyJ721
J
A
Electrical Instrument Panel Light Dimmer Switch
  • alchemist
  • Jul 14, 2019
  • Fox 5.0 Mustang Tech
Replies
4
Views
8K
Fox 5.0 Mustang Tech Jul 15, 2019
Saleen0679
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?