Blew the Ranger...

Finally blew it. A little teaser for now.
http://media.putfile.com/boost48

Ray is a mastermind... thanks a lot Ray. You need to give me a call and let me know... you know.

It put down around 260hp, 250ftlb... Chung hasnt put any timing back in that he took out on the bottom end. Dynod yesterday and mostly just cleaned up the air/fuel ratio. Right now, it stumbles horribly and like to hang out around 3-3500rpms and rpms will even drop when under throttle, can be very frustrating when needing to get on it for passing. The timing and tranny adjustments will be corrected friday or monday, hopefully. Ther torque should be near the 300ftlb range, then itll start pulling nicely in the upper end of the rpm range. Ive come to learn that horsepower is worthless without torque... or close. And this evening, the check engine light came on... .

Ill post more later.

Ray, Ill stop by some evening and take you for a ride, once its running good. I pulled out into traffic and it stumbled like crazy and I felt like an idiot, slowed people down a lot, it just wouldnt build rpms. I guess on moday Chung will have it back in his hands and hopefully cure it for good.

If it werent for Chung and the Jeffs, we would still be staring at that piece of paper and and redoing the upper intake 2 more times at least. There were so many people that helped us out, thanks to all. Ill make a new thread with pictures and videos and the whole shabang when its all cleaned up and running good. Should make Truck of the Month over at Ranger Power Sports.