I'm tryin to figure out what cam i should get. I plan on getting an s trim in the next year so it needs to be blower frendly but also be ok on an n/a car. I've heard e303 cam, tfs stg 1 & 2, and the steeda #19 cam are ok but i just thought i would ask you guys to see which would be really good.
blower cams?
- Thread starter hookups333
- Start date
Well all off the shelf cams, including the ones above, will be fine with a blower, except maybe the stage 2 depending on what kind of combo, cubic inches, etc you are running. To get the MOST out of your blower combo, i would really wait until you have the blower on your car if you're 100% sure you're going to get one. You can get blower specific cams that will run fine on an N/A car, but won't really shine until you have the blower. AFM, ed curtis, comp cams, etc all have nice blower cams. So basically to sum up:
A) buy blower cam now and make so/so power with your temporary N/A combo.
B) buy regular mild cam now, but not make as much power with boost.
A) buy blower cam now and make so/so power with your temporary N/A combo.
B) buy regular mild cam now, but not make as much power with boost.
www.andersonfordmotorsport.com has blower cams for our cars.
The ones mentioned above will work. Also there are more in the FAQ sticky. A custom cam should be the first choice though (FTI, Cammotions, Comp).
The ones mentioned above will work. Also there are more in the FAQ sticky. A custom cam should be the first choice though (FTI, Cammotions, Comp).
moneypit94
Active Member
AFM pretty much recommends the B31 for almost any application on a 94/95.
If your wanting to do it right i suggest Ed, or Jay. (Flowtech inductions, or Cam Motoivations) Custom to your application. I have dealt with Ed twice now and have nothing but good things to say about that SOB... hehehe
BTW NA Ed's cam sent my 331 into the low low 12's, Supercharged into the high high 10's wit ha vortech.
But turbo guys will say the cam in it right now is pretty good.
If your wanting to do it right i suggest Ed, or Jay. (Flowtech inductions, or Cam Motoivations) Custom to your application. I have dealt with Ed twice now and have nothing but good things to say about that SOB... hehehe
BTW NA Ed's cam sent my 331 into the low low 12's, Supercharged into the high high 10's wit ha vortech.
But turbo guys will say the cam in it right now is pretty good.
Well i think I'm gonna wait for the custom cam because i want to have a dart block so I can make the kind of stroker I want. So for this one I'm gonna go off the shelf for the cheapness and they seem to work pretty good pretty much everyone has them. So sometime in the next week im gonna call anderson and hp performance which is near me and see what they say about it.
Yobi1Kanobi
Member
- Apr 9, 2003
- 559
- 0
- 16
Im going with my tfs stage 1 with a 347 and 9# powerdyne...Reason why I already had it plus it drives really well. It is a good street cam.
