i recently was in an accident and my hood flew up to the window it didnt break the window but where the hood stops and the part in between the window and the hood is pretty bent up im wondering if this is fixable i looked and i couldnt find any bolts to take it off is it replaceable?
body help
- Thread starter Lx5.0Mustang
- Start date
You can fix it... got any detailed pics of the actual damage? For spots like that where you can't get to the back, use a stud welder and slide hammer. They work wonders 
Just make sure to some research on the basics like where on the dent to set the studs up, etc.
Just make sure to some research on the basics like where on the dent to set the studs up, etc.Yeah... are the edges alright? I took a look at mine, and it seems like if the edges are bent, it could be a real bitch.
the edges are ok its mainly where the plastic insert ends on both sides out almost to where it meets the fenders but not to the edges just sucks because i cant un-bolt it to replace it i would have to cut it out then weld it back. if i cant pop the dents out. thats what it seems like to me at least.
http://www.autobodytoolmart.com/pc-14183-475-7841-otc-eight-way-slide-hammer-puller-set-7947.aspx
maybe a kit like this. this was just a quick search but gives you an idea of the tools you are looking for. or this one
http://www.toolweb.com/AutoBodySupply/store.cfm?catID=26258&subcatID=48425&do=itemslist&expadd=1
maybe a kit like this. this was just a quick search but gives you an idea of the tools you are looking for. or this one
http://www.toolweb.com/AutoBodySupply/store.cfm?catID=26258&subcatID=48425&do=itemslist&expadd=1
SuperStang83
Founding Member
I had to do it before. I went to Eastwood and got a spotweld drill remover. It was a pain, but you have to get a junk car and drill all the spotwelds out, and then take your panel off the same way then respotweld it.
Similar threads
