Book: 101 Mustang Projects

[CochinoFilipino]

So I was a bookstore yesterday and saw a new one. They had a little display with various "Motorbooks" on it.

http://www.motorbooks.com/Store/ProductDetails_417.ncm

I thumbed through it and it looks like a good book. It had EFI conversions, cam changes etc. If your book store has it. I'd suggest taking a gander. I didn't get to far, as I got whiff of Sh** eminating from my 6 mo old's diaper and had to split.

Maybe this should be in "Talk". But as the book provides tech I put it here. Maybe someone has the book and can give a review.

 

[voipguy]

I received it as a gift recently. I've thumbed through it and it is pretty nice. Gives good explanations on the various mods with nice color photos, difficulty ratings, etc.

 

[CarFreakGT]

It's pretty good. It gives relative cost, time required and mechanic skill level required for various upgrades and projects. One thing to keep in mind, though. The descriptions are a general overview. If you're going to do one of the bigger projects in the book, don't use it as your only 'how-to' resource.

 

[CarFreakGT]

I almost forgot a cool feature of the book: it offers ideas for 'complementary projects' to do along w/ the upgrade you're reading about. Or, as I like to call them, 'while you're at it' projects.

 

[roan65]

sounds like a decent read. Just ordered on amazon.

 

[blackjackbender]

its a nice read, read it at the book store since im cheap but everything they do you can find online already as a write up.

 

[Max Power]

It is ploeasent looking, but it is far short on detail. Also, the difficulty scale is not consistent. I think, if I remember right, it rated front coil spring changover more difficult than an upper control arm swap. Well, you have to remove the coild springs to do that, so how could it be less difficult than coil springs?

I was unimpressed.