Bore question

jasonc84

New Member
Apr 8, 2006
10
0
0
I'm looking at an 87 GT this weekend, i went to look at it last weekend this time i'm going with money. I think i'm gonna take it even though there are a few little problems. My big question is about the motor, i can tell the owner isn't a car guy he bought it as is. Suposedly the motor is bored out to a 5.8, i don't know alot about stangs just getting into them but that seems like a big bore for a 5.0 block. Im sure the only way i could know for sure is to take the head off and look but i don't think the guy is gonna want me doing that. So i guess my 2 questions are is it possible to bore the 5.0 blck to a 5.8. And if it is, is it a safe bore or is the motor a time bomb. Thanks in advance for any info.
 
Stroker perhaps???? could be bored to 308 cu.in. and got the 5 liter and bored to 308 mixed together. I don't think you can make a 302(5.0L) a 351(5.8L). I would think that if it was stroked all the way to 351 it would be a blown cyl. waiting to happen.
 
he's been driving it for 3 years, and the guy who owned it before him dropped in a new botor like 5 years ago and it hasn't blown yet. I'm guessing the guy is just full of it you can tell he isn't a car guy. Im gonna take it for a drive and see how it feels.
 
Back in the day(i believe 98') Lunati had a stoker kit that turned a 302 into a 350. I think it really was 349ci but they advertised it as 350 in some of the older mags. I have. Maybe he was talking about that kit. Back then there was really no good info on side load of the pistons and comp. data that we have today.
 
If the displacement is actually 5.8L then someone did a conversion to a 351w motor. The 351w is a completely different engine family from the 302. But, this motor looks very similar to a 302/5.0, so if you didn't recognize the metric displacement you probably won't be able to tell the difference visually. Sometimes I have trouble telling the 2 apart.

If it is a 351w...
The lower intake will be wider than the 302. I don't know the measurements off the top of my head, but some digging will find that info I am sure.
The Fuel Injection hose that connects the left and right fuel lines, on the front and the back of the lower intake may have been replaced with high press. fuel line, and may have hose clamps holding it together. This how most people modify the fuel lines.

Is it efi or carb?

jason
 
A 302 CAN NOT be bored near that high. Not even your typical stroker kit + overbore will get you 5.8L. I have seen a 302 based 357 ... but that was an aftermarket block.

It's probably a stock sized engine or maybe a little overbored. Find the guy WHO DID THE ENGINE and ask him. That's what I did. You never can trust a random person selling a car. They can make up something that sounds good ... so you will buy.
 
I wouldnt' trust him, go with your instinct. It is a "fake"...

It isn't going to be bored over that much. The cylinder wall's (even if literally paper thin) wouldn't allow that much displacement...

I would let him know that and get it knocked down (price drop) or just let it be and don't get that particular car..good luck!
 
well the car having a 5.8 wasn't the selling point on the car at all, i was just curious if that was possible, i was pretty sure he was full of it. My buddy knows this guy and before i even called to ask bout the car my buddy was like he'll proly tell you the car has a bigger motor but it doesnt, he thinks it does but it doesn't (he's a huge mustang nut so i trust him)
 
well i went and test drove the car today had money with me to buy it but after driving it i looked at the title and it was a reconstructed title so i said no thank you, the brakes felt like crap and the car didn't have much power oh well the search continues.