• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Bore question

  • Thread starter Thread starter jasonc84
  • Start date Start date Apr 13, 2006
J

jasonc84

New Member
Apr 8, 2006
10
0
0
Apr 13, 2006
#1
  • Apr 13, 2006
  • #1
I'm looking at an 87 GT this weekend, i went to look at it last weekend this time i'm going with money. I think i'm gonna take it even though there are a few little problems. My big question is about the motor, i can tell the owner isn't a car guy he bought it as is. Suposedly the motor is bored out to a 5.8, i don't know alot about stangs just getting into them but that seems like a big bore for a 5.0 block. Im sure the only way i could know for sure is to take the head off and look but i don't think the guy is gonna want me doing that. So i guess my 2 questions are is it possible to bore the 5.0 blck to a 5.8. And if it is, is it a safe bore or is the motor a time bomb. Thanks in advance for any info.
 

302RollinHard

New Member
Sep 26, 2005
0
0
0
Columbus, OH
Apr 13, 2006
#2
  • Apr 13, 2006
  • #2
Stroker perhaps???? could be bored to 308 cu.in. and got the 5 liter and bored to 308 mixed together. I don't think you can make a 302(5.0L) a 351(5.8L). I would think that if it was stroked all the way to 351 it would be a blown cyl. waiting to happen.
 
J

jasonc84

New Member
Apr 8, 2006
10
0
0
Apr 13, 2006
#3
  • Apr 13, 2006
  • #3
he's been driving it for 3 years, and the guy who owned it before him dropped in a new botor like 5 years ago and it hasn't blown yet. I'm guessing the guy is just full of it you can tell he isn't a car guy. Im gonna take it for a drive and see how it feels.
 

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
Apr 13, 2006
#4
  • Apr 13, 2006
  • #4
Back in the day(i believe 98') Lunati had a stoker kit that turned a 302 into a 350. I think it really was 349ci but they advertised it as 350 in some of the older mags. I have. Maybe he was talking about that kit. Back then there was really no good info on side load of the pistons and comp. data that we have today.
 

fidstang

New Member
Jul 19, 2005
307
0
0
South Lansing
Apr 13, 2006
#5
  • Apr 13, 2006
  • #5
good info on side load of the pistons and comp. data that we have today.
__________________
I meant comp. height data. dealing with the wrist pin interference.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Apr 13, 2006
#6
  • Apr 13, 2006
  • #6
If the displacement is actually 5.8L then someone did a conversion to a 351w motor. The 351w is a completely different engine family from the 302. But, this motor looks very similar to a 302/5.0, so if you didn't recognize the metric displacement you probably won't be able to tell the difference visually. Sometimes I have trouble telling the 2 apart.

If it is a 351w...
The lower intake will be wider than the 302. I don't know the measurements off the top of my head, but some digging will find that info I am sure.
The Fuel Injection hose that connects the left and right fuel lines, on the front and the back of the lower intake may have been replaced with high press. fuel line, and may have hose clamps holding it together. This how most people modify the fuel lines.

Is it efi or carb?

jason
 

SeventyMach1

Keep it lubed .... keep it straight .... and keep
Mar 30, 2005
1,940
3
36
North Carolina
Apr 13, 2006
#7
  • Apr 13, 2006
  • #7
A 302 CAN NOT be bored near that high. Not even your typical stroker kit + overbore will get you 5.8L. I have seen a 302 based 357 ... but that was an aftermarket block.

It's probably a stock sized engine or maybe a little overbored. Find the guy WHO DID THE ENGINE and ask him. That's what I did. You never can trust a random person selling a car. They can make up something that sounds good ... so you will buy.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Apr 13, 2006
#8
  • Apr 13, 2006
  • #8
I wouldnt' trust him, go with your instinct. It is a "fake"...

It isn't going to be bored over that much. The cylinder wall's (even if literally paper thin) wouldn't allow that much displacement...

I would let him know that and get it knocked down (price drop) or just let it be and don't get that particular car..good luck!
 
J

jasonc84

New Member
Apr 8, 2006
10
0
0
Apr 14, 2006
#9
  • Apr 14, 2006
  • #9
well the car having a 5.8 wasn't the selling point on the car at all, i was just curious if that was possible, i was pretty sure he was full of it. My buddy knows this guy and before i even called to ask bout the car my buddy was like he'll proly tell you the car has a bigger motor but it doesnt, he thinks it does but it doesn't (he's a huge mustang nut so i trust him)
 
J

jasonc84

New Member
Apr 8, 2006
10
0
0
Apr 15, 2006
#10
  • Apr 15, 2006
  • #10
well i went and test drove the car today had money with me to buy it but after driving it i looked at the title and it was a reconstructed title so i said no thank you, the brakes felt like crap and the car didn't have much power oh well the search continues.
 
You must log in or register to reply here.

Similar threads

Strange timing issue
  • 92 Bimini Blue
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
739
Fox 5.0 Mustang Tech Oct 20, 2026
rednotch
Engine Are These rings OK?
  • PonyGTrider
  • Sep 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
344
Fox 5.0 Mustang Tech Sep 26, 2026
PonyGTrider
Weber Carburetor tuning help
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
244
1965 - 1973 Classic Mustangs -General/Talk- Jul 19, 2026
SchwarzStock
B
Front window issues
  • bruno
  • Nov 7, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
212
Fox 5.0 Mustang Tech Tuesday at 10:26 PM
AeroCoupe
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
601
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?