• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Brake Kit

  • Thread starter Thread starter cheeks
  • Start date Start date Oct 17, 2006
C

cheeks

Founding Member
Nov 30, 1999
262
0
16
Oct 17, 2006
#1
  • Oct 17, 2006
  • #1
Hello,
I had a few questions regarding the brake kit from Late Model Restoration Supply...($399) What kind of axles are in this kit, and also is this a complete kit to perform a 5 lug swap?? Any thoughts/comments on this kit would be appreciated...thanx again
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
Oct 17, 2006
#2
  • Oct 17, 2006
  • #2
I'm not sure what brand the axles are, but here is the description from the website.

The most economical and comprehensive kit on the market! Kit includes 2 five lug front rotors. 2 five lug rear axles* and drums, 2 inner and outer front wheel bearings, 2 front rotor grease seals, 2 axle bearing and seal kits, 1 bottle of friction modifier, and 3 bottles of Royal Purple 75W90 gear oil. This kit has EVERYTHING you need to convert your 87-93 5.0L to 5-lug the right way!

79-86 cars and 87-93 2.3L cars need to use 87-93 5.0L spindles, struts, and calipers.

*Axles are stock length 28 spline, with a 5" x 4.5" bolt pattern. They are made from high quality steel and through hardended to increase touque capacity 25% over a stock axle.
Click to expand...
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Oct 17, 2006
#3
  • Oct 17, 2006
  • #3
Also, if you use this style swap you will not be able to run certain rims due to the large spindle hub and dust cap.

The axles are probably out of an aerostar or ranger - just new. The rotors are probably from a old Linclon Mark Vii
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
Oct 17, 2006
#4
  • Oct 17, 2006
  • #4
srothfuss said:
Also, if you use this style swap you will not be able to run certain rims due to the large spindle hub and dust cap.
Click to expand...

Not to mention you will likely be increasing wheel diameter, thereby increasing rotational mass, thereby requiring greater braking force to stop the same as OEM distance w/ stock wheels (which is terrible to begin with). The 50resto kit fails to offer better braking performance than stock. You ultimately end up with stock performaing type brakes w/ larger wheels that results in an increased stopping distance - i.e. worse braking performance than where you are now and you pay $400 for it too.
 
C

cheeks

Founding Member
Nov 30, 1999
262
0
16
Oct 17, 2006
#5
  • Oct 17, 2006
  • #5
Can anyone confirm that Summit no longer carries the M2300k 5 lug Cobra brake kit?? (did not find it on the website)...Also the price went up to $2400??...(Last time i checked it was $2000)!!
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Oct 17, 2006
#6
  • Oct 17, 2006
  • #6
They might have discontined the kit... Other companies like baer sell basic kits for a little more than the MK kit.


Or you can piece together a "modern" brake setup with 94/95 spindles and brakes.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,164
17,860
224
Massachusetts
Oct 17, 2006
#7
  • Oct 17, 2006
  • #7
I thought this kit was discontinued years ago and dealers were just selling off stockpiled inventory??
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Oct 17, 2006
#8
  • Oct 17, 2006
  • #8
Either get a setup off a 96+, even off a V6. Either that or a whole aftermarket system. Reason being because the standard fox upgrade wouldn't even pass new car standards on a mini-van. To be honest, once you consider the price, then the price of the aftermarket system, the value is better aftermarket. I am planning on a Strange/Aerospace drag brake setup.
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
Oct 19, 2006
#9
  • Oct 19, 2006
  • #9
cheeks said:
Can anyone confirm that Summit no longer carries the M2300k 5 lug Cobra brake kit?? (did not find it on the website)...Also the price went up to $2400??...(Last time i checked it was $2000)!!
Click to expand...

Summit has it listed on page 289 of their November/December 2006 catalog. Price = 2109.95
 

MikeC

Founding Member
Aug 1, 2002
240
0
16
SLC, UT
Oct 19, 2006
#10
  • Oct 19, 2006
  • #10
cheeks said:
Can anyone confirm that Summit no longer carries the M2300k 5 lug Cobra brake kit?? (did not find it on the website)...Also the price went up to $2400??...(Last time i checked it was $2000)!!
Click to expand...
I called Summit about it a few days ago. They said discontinued, even though its in their new catalog.
Steeda says some of the parts in are not produced anymore so Ford is deciding if they should use remanufactured parts (MC, booster). No time estimate.
Brothers called Ford while I was on hold (atleast they said they did), they were told the kit would be avaliable on Oct 31st.
So who knows if will be made again.
FYI: I originally bought a kit in 1997, it cost me $1200. I bought another one in 1998, that one cost $1400.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,355
207
114
Ohio
Oct 20, 2006
#11
  • Oct 20, 2006
  • #11
tunedin302 said:
Summit has it listed on page 289 of their November/December 2006 catalog. Price = 2109.95
Click to expand...

I was thinking about this Thread when I seen it in the Catalog Yesterday. My Booster was dented when I bought my Kit so I called Ford Racing to get another one and the guy said they were going to cancel that kit years ago when their supplies ran out, but its been popular so they keep on finding someone to supply parts that they run out of, I would say the kits are just on back order for a while.
 
You must log in or register to reply here.

Similar threads

8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
466
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
J
Wheels-Tires Need Some Help - Brakes Upgrade/Wheel fitment
  • jaygee15
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
81
Views
2K
Fox 5.0 Mustang Tech May 6, 2026
AeroCoupe
C
Fox Need help identifying brake setup
  • Cypher02xd
  • Apr 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
109
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2026
Mustang5L5
D
Brakes 88 LX 5.0 - help! no brakes
  • DRGunn427
  • Feb 26, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
390
Fox 5.0 Mustang Tech Feb 27, 2025
nickyb
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
13
Views
386
SN95 V6 Mustang Tech Monday at 2:45 PM
joeybuddy96
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?