Hi All,
This is for a 2003 V6 Mustang.
Around 3 years back, I had replaced the front drivers brake line that connects the brake hose (caliper) and the master cylinder. All was good until recently that I noticed a drop in the reservoir which is due to a leak right at the connection of the brake line and the brake hose. I tightened it a bit but it still leaks. Then I loosened it by a quarter turn and tightened it again. It still leaks. Maybe even worse now. Any help or pointers would be appreciated.
Thanks!
This is for a 2003 V6 Mustang.
Around 3 years back, I had replaced the front drivers brake line that connects the brake hose (caliper) and the master cylinder. All was good until recently that I noticed a drop in the reservoir which is due to a leak right at the connection of the brake line and the brake hose. I tightened it a bit but it still leaks. Then I loosened it by a quarter turn and tightened it again. It still leaks. Maybe even worse now. Any help or pointers would be appreciated.
Thanks!