Brake Problem...

K

kyles03sonicgt

New Member

Nov 30, 2005

111

0

0

Berkley, Michigan

Jan 25, 2007

#1

• Jan 25, 2007

• #1

Alrighty guys, this problem started about 2 months ago when my brakes started squeaking so I got some new pads and rotors. But the squeaking is still here, but the thing is when I push on the breaks the squealing stops. It sounds as if something is if rubbing against the pad and when I close the caliper the squealing starts. Do you guys have any ideas as to what this noise is??

 

forum155pl

New Member

Jul 11, 2006

520

0

0

the 509

Jan 25, 2007

#2

• Jan 25, 2007

• #2

did you put thos little clips on the end of the pads when you installed em?... also ive heard of people warping thier calipers.. might be the issue.. is all the brakes or just one?

 

B

blubullett

Member

Jun 22, 2006

535

6

18

Modesto, CA

Jan 25, 2007

#3

• Jan 25, 2007

• #3

Either what he said or.....you need to lube up the slides on your caliper or it wont open fully when you get off the pedal.

 

forum155pl

New Member

Jul 11, 2006

520

0

0

the 509

Jan 25, 2007

#4

• Jan 25, 2007

• #4

it might also be a wheel bearing thats worn out...

 

K

kyles03sonicgt

New Member

Nov 30, 2005

111

0

0

Berkley, Michigan

Jan 25, 2007

#5

• Jan 25, 2007

• #5

Wheel bering?? Would that noise stop even when i push down the brake pedal?

 

R

Red2000GT

Founding Member

Sep 10, 2000

2,450

0

46

Regina,Sask.Canada

Jan 25, 2007

#6

• Jan 25, 2007

• #6

No,not a wheel bearing problem. Definately anti-rattle clips.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,141

17,839

224

Massachusetts

Jan 25, 2007

#7

• Jan 25, 2007

• #7

Is the squeak from the front or rear?

If the rear, make sure the slide pins can move freely. If one is seized, it will put constant pressure on the rotor in a way that may cause a squeal