Brenspeed tune problem/question

[dbrufus1234]

I got my Brenspeed tune installed tonight (tune only), and it runs good and the power is great, but it seems to be idling a little lower than stock idle. It is fine when im in Park, right at 750, but when i am driving it will drop to around 500-600 rpm, but its not running rought or acting like it is going to stall. Is this a problem? and how do i get the idle back to around 750?

Thanks

 

[racerraj]

I would check with him if it bothers you... but... If it is not causing any problems, I'd live with it. You'll save gas when in traffic and at idle.

That may be why he did that.

 

[dbrufus1234]

well i call brenspeed and they said to clean out the TB, does that sound right to yall?

 

['08GTcaRED]

Yeah actually a few folks on here had some idle issues and it was a dirty TB...don't know why it would show up after the tune and not before, but hey it's not that hard to clean

 

[Fordfreak95]

You can set the idle speed to what every you want in the tuner. Just open it up with the adjustable options. It's been a while since I did it but it is very simple....