Broken factory fuel test post, HELP!

[John Dough]

last night i was tightening the fuel line that runs from the factory fuel test port to the solenoid, and the entire piece just snapped off. There is still some of it left in the hole where it was. What should i do? Can it be replaced??

 

[lopey4.6]

As far as I know that the replacement fuel rail from ford do not have the test port on them. They only come on the rails from the factory. So you may be S%$@ out of luck.

 

[forpit2000gt]

I don't know if you can get the exact same fuel rail from Ford. Try a salvage yard, you need to replace the rail. It is not hard to do. Do not turn the key on or there will be fuel everywhere.

 

[Roush97]

if you need a stock fuel rail, ive got a spare set...let me know

 

[John Dough]

thanks guyes. I'v just realized that the part i broke was NOT the factory part, but the part supplied by NX that replaces it. The part that goes from the fuel rail to the solenoid. Can i order a new one from NX?