Bullit Suspension help

T

tderrick

Member

Oct 27, 2004

312

0

17

May 4, 2005

#1

• May 4, 2005

• #1

I've just about gathered all the parts I need to do the install, and just have a question about what order to replace the parts when I go in...

How about...

1st - the front stuts and springs. Followed by
2nd - Front sway bar
3rd - rear shocks (quad & main). Then finally...
4th - the rear sway bar...

Sound like a good order to install??

Thanks guys....

 

T

tderrick

Member

Oct 27, 2004

312

0

17

May 5, 2005

#2

• May 5, 2005

• #2

Just running this through again...

Install seems pretty straight foward. Just wondering if there's anything I should look out for...

 

94-302-vert

Active Member

Aug 16, 2004

1,947

2

36

NE CT

May 5, 2005

#3

• May 5, 2005

• #3

Not really. It is pretty straight forward. Jsut take your time and do it right.


There is a lot of potential energy with a car (car up on jackstands, springs, etc). jsut think about what you are doing before you do it and remember that heat and penetrating oils are your friends.

Chris

 

T

tderrick

Member

Oct 27, 2004

312

0

17

May 5, 2005

#4

• May 5, 2005

• #4

94-302-vert said:

Not really. It is pretty straight forward. Jsut take your time and do it right.
There is a lot of potential energy with a car (car up on jackstands, springs, etc). jsut think about what you are doing before you do it and remember that heat and penetrating oils are your friends.
Chris

Click to expand...

Thanks... got the Blaster and propane torch ready

 

94-302-vert

Active Member

Aug 16, 2004

1,947

2

36

NE CT

May 5, 2005

#5

• May 5, 2005

• #5

Heat, lubricant, & leverage is what you need. I found a lot of nuts and bolts taht needed leverage and persuasion (BFH) instead of my cheapo impact gun.

Good luck!
Chris