Buzzing Vibration when turning Left...

Adam95GT

New Member

Aug 14, 2006

2,564

3

0

Burlington, NJ

Aug 26, 2007

#1

• Aug 26, 2007

• #1

I had the car up in the air to put the cats back on to pass inspection and i spun the pass side wheel and hurd a slight CrrWHURRRR sound its barley noticable and its not the pads dragging i can hear that as well... you think my wheel bearing is on its way out... is there any easy way to tell... or a cheap place to buy a new one...

 

Adam95GT

New Member

Aug 14, 2006

2,564

3

0

Burlington, NJ

Aug 26, 2007

#2

• Aug 26, 2007

• #2

 

1TallMF

New Member

Apr 17, 2006

955

1

0

Montreal

Aug 27, 2007

#3

• Aug 27, 2007

• #3

Weird... bad wheel bearing is a possibility, but also check to see if the ABS wheel is for some reason touching the sensor tip or some sort of debris
Can you feel any play when you rock the tire side-to-side in the 12/6 o'clock and also at 3/9 o'clock directions?

 

Pokageek

Active Member

Jun 10, 2005

2,767

0

46

MA, USA

Aug 27, 2007

#4

• Aug 27, 2007

• #4

Likely yes. The way most folks tell is if it happens when turning..

 

Adam95GT

New Member

Aug 14, 2006

2,564

3

0

Burlington, NJ

Sep 1, 2007

#5

• Sep 1, 2007

• #5

sounds like its comming from the drivers side... its still here...

 

Adam95GT

New Member

Aug 14, 2006

2,564

3

0

Burlington, NJ

Sep 1, 2007

#6

• Sep 1, 2007

• #6

this is kinda like whats hapening...

http://forums.stangnet.com/showthread.php?t=609876&highlight=vibration+when+turning

and this

http://forums.stangnet.com/showthread.php?t=577346&highlight=vibration+when+turning


its only when going strait or turning left... worst at about 40... its not noticable till then going like 50 its not as bad.... you guys still think bearing... it makes a Vuuuuuuuuuuuu sound but it sounds like the drivers side but i cant tell...

 

Adam95GT

New Member

Aug 14, 2006

2,564

3

0

Burlington, NJ

Sep 1, 2007

#7

• Sep 1, 2007

• #7

rotors maybe??? i just had the alignment done not that long ago and the tires mounted and balanced... should i take it back and have them chek the tires and recheck the alignment... with maxxed out camber with the plates they could only get me to a -1.6 but it was at -2.2 and -2.3 so i guess it has improved alot.... im not noticing any weird wear or anything now atleast.... just this damn vibration

 

Adam95GT

New Member

Aug 14, 2006

2,564

3

0

Burlington, NJ

Sep 1, 2007

#8

• Sep 1, 2007

• #8

another close one no answers though
http://forums.stangnet.com/showthread.php?t=539963&highlight=vibration+when+turning

 

Adam95GT

New Member

Aug 14, 2006

2,564

3

0

Burlington, NJ

Sep 1, 2007

#9

• Sep 1, 2007

• #9

another idea...
http://forums.stangnet.com/showthread.php?t=529713&highlight=vibration+when+turning