C-4 Rebuild

[The Dan]

What should one expect to pay for a C-4 complete rebuild? Aamco quoted me $1000-$1200. Does this sound reasonable? I might add that is with a 3 year 36,000 mile warranty.

 

[Max Power]

that is isually the number. I was quoted $1000.

 

[crushnut]

Why so much

 

[stevensmach]

I think you can get a new one for less than that. I had mine rebuilt a few years ago for a little over $300 and I had to have the pump and few other things replaced.

 

[TN67Coupe]

you can get a streetfighter C4 from TCI Automotive with a lot of upgraded parts for about $750.

 

[TOM B]

trany shops are one of the biggest rip offs, so are insurance companys, so do it your self. I bought a street race kit and paid $220 . it included everything I needed from the red clutches to the bands and o rings and the bushings. If you cant do it yourself then get one thats done already and built for the street or strip.. dont pay 1200 dollars for a simple rebuild.

 

[golf4283]

I paid 1100 to have mine rebuilt with new bands and a trans-go shift kit. works great. Too bad my cars in pieces right now

 

[bswor]

I was quoted $400 for a complete rebuild. My clutches are almost shot. Instead I opted to go with one of these: http://www.usaplaza.com/scripts/wcom_producttree.asp?StoreID=1078&ProductID=31801

Their is a ebay seller who is a vendor for Performance Automatic who builds these transmissions. You can get your brand new c4 with heavy duty clutches and kevlar bands etc for $735-745 shipped. Much stronger than TCI's. Go to www.fordmuscle.com and click forums and scroll down to their c4 forum and read what others have to say about the TCI and PA (performance automatic) trannys. IMO this is the way to go.

 

[Max Power]

I am guessing that the quote was for the tranny still in the car.

If you carry it in, it's a lot cheaper, although you would be real hard pressed to find a rebuild for $300 anywhere. parts alone will be near that.

 

[golf4283]

yea, they had to take mine out of the car and rebuild then re-install. That is why it was a lot.

 

[10secgoal]

I built mine and spent a measley 430 for EVERYTHING brand new, some machine work to the drums and a manual valvebody. And 20 bucks for the video. It will hold 600 hp with a transbrake. If you don't need that, 100 is still way to much I think, even if you don't pull it yourself. Benched should go for around 300-350. I had a freind that has his towed to the shop and rebuilt for 600.