• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

C&L maf

  • Thread starter Thread starter jake2582
  • Start date Start date Dec 24, 2007

jake2582

New Member
Jan 8, 2007
107
0
0
tallapoosa
Dec 24, 2007
#1
  • Dec 24, 2007
  • #1
is the big end of it the inlet side?
also is the slanted end or the straight cut end of the sample tube the in or out?
 
J

JamesB88

Member
May 29, 2004
228
0
16
North Kansas City
Dec 24, 2007
#2
  • Dec 24, 2007
  • #2
Big end should be the inlet, what size is it? The slanted side should face the air coming in.
 

jake2582

New Member
Jan 8, 2007
107
0
0
tallapoosa
Dec 24, 2007
#3
  • Dec 24, 2007
  • #3
76mm.
i put the big end as the inlet.
can the tube be installed backwards?
 

satanas

Member
Dec 16, 2005
156
3
19
Arizona
Dec 24, 2007
#4
  • Dec 24, 2007
  • #4
why would you want to install it backwards? The part were the conection should be facing the fender
 

jake2582

New Member
Jan 8, 2007
107
0
0
tallapoosa
Dec 24, 2007
#5
  • Dec 24, 2007
  • #5
you have to take your stock plug and plastic piece on a new c&l maf.
it can be installed backwards
 

jake2582

New Member
Jan 8, 2007
107
0
0
tallapoosa
Dec 25, 2007
#6
  • Dec 25, 2007
  • #6
ttt
 

RMODEL65

Member
Jul 6, 2005
313
1
18
brunswick ga
Dec 26, 2007
#7
  • Dec 26, 2007
  • #7
the slanted side of the tube is the rear(outgoing air) the flat side is the inlet(incoming air) yes it can be installed backwards as fo rhte direction the housing fits it only would go one wa y in my car the bracket wouldnt let it go another way if iirc and the hoses were also sized differently
 

RMODEL65

Member
Jul 6, 2005
313
1
18
brunswick ga
Dec 26, 2007
#8
  • Dec 26, 2007
  • #8
facing the car from the grille the meter hould have one bolt towards inner fender and 2 towards the motor
 

jake2582

New Member
Jan 8, 2007
107
0
0
tallapoosa
Dec 26, 2007
#9
  • Dec 26, 2007
  • #9
it is correct. i got it figured out.
btw. i took the bracket off*
 
You must log in or register to reply here.

Similar threads

R
Help finding where this ground goes on the L head
  • RubberDuckUsb
  • Sep 11, 2026
  • 2010 - 2014 Specific Tech
Replies
0
Views
158
2010 - 2014 Specific Tech Sep 11, 2026
RubberDuckUsb
R
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
373
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
242
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
J
Engine 4.6 Running rough at half throttle
  • jake411
  • Aug 3, 2026
  • SN95 4.6L Mustang Tech
Replies
5
Views
317
SN95 4.6L Mustang Tech Oct 20, 2026
DangStitches
D
A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
290
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?