• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

C9E Block questions

  • Thread starter Thread starter MysteryMachine
  • Start date Start date Jan 22, 2008

MysteryMachine

Active Member
Jun 21, 2003
1,835
2
39
Parkesburg, PA
Jan 22, 2008
#1
  • Jan 22, 2008
  • #1
I'm looking at an old C9E block to drop in my 94 GT. I see a few of you have dropped 460's into foxes so I figured I would ask my questions in here.

I want to work this motor up. can anybody tell me whats the highest hp these blocks will handle?

I see you guys needed a new oil pan, serp belt setup, and mounts. I'm guessing I would need the same stuff. Is this correct?

Is there any added weight to the front of the car? As of right now my car is lowered 2" and I have KYB GR-2 Struts. Would this be a problem?

One of teh most important problems I'll have. Can I make it pass emissions? I'd like to be able to drive it whenever I want. Would this be possible?



The idea is getting this old block and a 514 stroker kit and build up a streetable monster. That if I wanted to I could drive everyday. You see plunty of people on here with crazy HP dd why can't my idea work for another one
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jan 22, 2008
#2
  • Jan 22, 2008
  • #2
I don't think it would pass emissions. I have never seen one in a sn95, but it would be cool. I'll ask some of my friends and see what they say.
 

MysteryMachine

Active Member
Jun 21, 2003
1,835
2
39
Parkesburg, PA
Jan 22, 2008
#3
  • Jan 22, 2008
  • #3
Thanks. From what i get outta my thread in the 94-95 section the 85 and up 460's were emission motors. So I could use parts off of one of them to make it pass. Just a thought don't know if it would work or not
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jan 24, 2008
#4
  • Jan 24, 2008
  • #4
I ask my sn95 buddy and he said that a guy here did one a few years ago, but I have not had a chance to ask the guy.
 

MysteryMachine

Active Member
Jun 21, 2003
1,835
2
39
Parkesburg, PA
Jan 24, 2008
#5
  • Jan 24, 2008
  • #5
sweet if you get a chance to talk to him find out. hell get him to start posting on here so I'll have some one to ask questions lol
 

MysteryMachine

Active Member
Jun 21, 2003
1,835
2
39
Parkesburg, PA
Jan 25, 2008
#6
  • Jan 25, 2008
  • #6
well in that last few minutes of the auction somebody bid he next amount and beat me and I didn't get any emails to know. figures when I don't check it for a min I lose. Was looking on ebay again last night.

What do ya'll think of these?

http://cgi.ebay.com/ebaymotors/Lot-...017QQitemZ270205934169QQrdZ1QQsspagenameZWDVW


Lot of 3 blocks. 2 have some parts ones complete that had a rod throught the oil pan. I was thinking i could at some point have them all gone over and sell off the 2 I don't use and the parts to fund the project. Not sure though they look kinda rough.


Also might ask around some junk yards. I kinda liked the idea of just a bare block that I could piece together though. I'm kinda worried if i go to a junk yard they will only have newer blocks. I want a older one cause of toughness. I don't wanna be like ya i need a old one and a new one please unless i can get the real cheap
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Jan 25, 2008
#7
  • Jan 25, 2008
  • #7
MysteryMachine said:
well in that last few minutes of the auction somebody bid he next amount and beat me and I didn't get any emails to know. figures when I don't check it for a min I lose. Was looking on ebay again last night.

What do ya'll think of these?

http://cgi.ebay.com/ebaymotors/Lot-...017QQitemZ270205934169QQrdZ1QQsspagenameZWDVW


Lot of 3 blocks. 2 have some parts ones complete that had a rod throught the oil pan. I was thinking i could at some point have them all gone over and sell off the 2 I don't use and the parts to fund the project. Not sure though they look kinda rough.


Also might ask around some junk yards. I kinda liked the idea of just a bare block that I could piece together though. I'm kinda worried if i go to a junk yard they will only have newer blocks. I want a older one cause of toughness. I don't wanna be like ya i need a old one and a new one please unless i can get the real cheap
Click to expand...

Go to the bone yards and see. The one close to my house has one and they want $500 and that is to pull it. You should be able to find a good deal.
 

MysteryMachine

Active Member
Jun 21, 2003
1,835
2
39
Parkesburg, PA
Jan 26, 2008
#8
  • Jan 26, 2008
  • #8
Yeah I'm gonna keep an eye on these 3 and maybe take a ride to the local junk yard tomorrow and see what they got. I have always been against junkyard motors but if I'm rebuilding the whole thing anyway its basically new.
 

S351R"Animal"

20+ Year Stangneter
Dec 3, 2002
708
0
16
Manhattan, KS
Jun 15, 2008
#9
  • Jun 15, 2008
  • #9
You will need new springs and probably new struts. It is possible to make it pass emissions but, it will take alot of work on your part. An aftermarket DFI set-up (FAST XFI, Accel Gen7, or Big Stuff) would be needed. The stock C9 block unless it is from a Boss (4 bolt main) is good to the 800 range N/A.
 
You must log in or register to reply here.

Similar threads

S
Block questions
  • s_vargas54
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 8, 2026
Trogdor
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
709
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
491
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
D
Mustang not starting
  • Dawry Ramos
  • Sep 12, 2026
  • 2015 - 2023 Specific Tech
Replies
10
Views
404
2015 - 2023 Specific Tech Oct 3, 2026
Dawry Ramos
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?