cam help please!!!

[1bad04GT]

hello everyone,
i am in a position to get a great deal on an frpp z303 cam. i have a 1994 mustang gt with 373s, a bbk cai, equal-length shorties, and an o/r x-pipe. is this cam too big for my car? i plan on going with either the holley systemax or trick flow package in the future. should i get this cam with those things in mind? will it even work. is piston to valve clearance going to be an issue? if i should get this, what would i need besides the cam itself? any help is greatly appreciated.

 

[mootang]

It would not be worth getting unless you had more modifications. it is way to big of a cam for a stock 5.0

the kits you talked about getting come with good cams that are matched to the kit so there is really no point in buying a cam now.

 

[SeriousSN95]

go with an F303 cam, thats the biggest you can put in a stock headed 5.0 the z will screw your whole maf and throttle body system up. your car will rn like crap unless u upgrade injectors maf.

 

[Yobi1Kanobi]

I have a TFS stage 1 that is more than enough for your setup now if you want it. but I would not go any bigger than that or and e303 cam.

 

[1bad04GT]

if i went with the e303 and got it tuned right, how much of a power increase could i expect?

 

[mootang]

not a lot with the stock heads and intake. I would save for heads and intake first.