Cam Help....

LS2 KLR · Apr 5, 2004

I had a new motor put in a month ago and I bought SHM 2730 cams. They are fine and I bought them because I was told I couldn't get anything above a 500 lift with 10.5:1 compression. I have since found out differently and want to get some cams with a nasty idle. I already have comp cam valve springs. What cams/company would you guys suggest???

pony_vert02 · Apr 5, 2004

are you going to sell the 2730 cams? if so, how much?

mogs01gt · Apr 5, 2004

Go with an all motor cam. The VT all motor cams are the best from what I can tell.

Nick

VTEngines · Apr 5, 2004

mogs01gt said:
Go with an all motor cam. The VT all motor cams are the best from what I can tell.

Nick

So, can I agree with you?

stangman · Apr 5, 2004

VTEngines said:
So, can I agree with you?

well since i'm not sure if you can agree or not i'll second it for ya

LS2 KLR · Apr 5, 2004

VTEngines said:
So, can I agree with you?

Can you give me a number so you can give me your ideas on what I need for my setup? I had talked to a specific company a couple of weeks after my motor install and he told me he called someone from VT and was told because of my compression they didn't think I could go higher than a 500 lift I'd like to order them tomorrow!

I was thinking around $400 for my 2730s.

DrK MrK iV · Apr 5, 2004

I hear some excellent things from VT. Stage one's or two's? I hear you might want to get headwork if you're going with stage twos.

VTEngine · Apr 5, 2004

Joe347R6 said:
I had talked to a specific company a couple of weeks after my motor install and he told me he called someone from VT and was told because of my compression they didn't think I could go higher than a 500 lift I'd like to order them tomorrow!

Nope. We'd never say that, because these cams were designed for cars with additional compression. Phone # is in my sig if you want to discuss your specific application. Jim or I will be more than willing to answer any questions you may have.

Cam Help....

LS2 KLR

Member

pony_vert02

New Member

mogs01gt

VTEngines

New Member

stangman

LS2 KLR

Member

DrK MrK iV

New Member

VTEngine

Similar threads

Cam Help....

Member

New Member

New Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency