• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Cam Question

  • Thread starter Thread starter svtcobra928
  • Start date Start date Mar 6, 2006
S

svtcobra928

New Member
Oct 5, 2002
3
0
0
Pennsylvania
Mar 6, 2006
#1
  • Mar 6, 2006
  • #1
Ive been cam shoppin for a while and still can't make up my mind. its goin in the stang(mods in sig) but im not sure if the lift is too big. Its the Ford racing f-303 cam. specs below
Brand: Ford Racing Performance Parts
Product Line: Ford Racing Camshafts
Cam Style: Hydraulic roller tappet
Intake Duration at 050 inch LiftVL: 226
Exhaust Duration at 050 inch LiftVL: 226
Duration at 050 inch Lift: 226 int./226 exh.
Advertised Intake DurationVL: 288
Advertised Exhaust DurationVL: 288
Advertised Duration: 288 int./288 exh.
Intake Valve Lift with Factory Rocker Arm RatioVL: 0.512 in.
Exhaust Valve Lift with Factory Rocker Arm RatioVL: 0.512 in.
Valve Lift with Factory Rocker Arm Ratio: 0.512 int./0.512 exh. lift
Lobe Separation (degrees)VL: 109
Intake Valve Lash (in)VL: 0.000 in.
Exhaust Valve Lash (in)VL: 0.000 in.
Computer Controlled Compatible: No
Grind Number: M-6250-F303

im debating between this and the e-303 but ive heard the f-303 in a stang and it sounds bad ass! in the near future i plan to add nitrous so i dunno if that would be a factor. If anyone has any suggestions on this cam or if they have any other recommendations i would greatly appreciate it.
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Mar 6, 2006
#2
  • Mar 6, 2006
  • #2
With stock heads I'd get the Bcam or Ecam, but I'm no expert.
 

SilverFoxbody

New Member
Apr 7, 2005
149
0
0
Mar 7, 2006
#3
  • Mar 7, 2006
  • #3
heads are holding you back...heads are very important.
 

1990Coupe

Founding Member
Mar 11, 2002
1,462
132
114
Toms River NJ
Mar 7, 2006
#4
  • Mar 7, 2006
  • #4
SilverFoxbody said:
heads are holding you back...heads are very important.
Click to expand...

Yea but he has a 3 angle valve job, and what if they are ported. if they are ported doesnt that change everything?
 
S

svtcobra928

New Member
Oct 5, 2002
3
0
0
Pennsylvania
Mar 7, 2006
#5
  • Mar 7, 2006
  • #5
unfortunately, the heads are not ported
 
You must log in or register to reply here.

Similar threads

N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
344
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
603
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
J
MEED HELP!! 86 mustang
  • Jacob0121
  • Jan 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
492
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
CAMTWO1070
SBF Head Flow Table - Work in Progress
  • Noobz347
  • Sep 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
17
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 30, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?