• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Cam question.

  • Thread starter Thread starter 88 Fox GT
  • Start date Start date Apr 17, 2006

88 Fox GT

Active Member
Nov 18, 2002
1,674
0
36
Iowa
Apr 17, 2006
#1
  • Apr 17, 2006
  • #1
I just bought this really clean '88 GT last Friday. It came with a few extra parts like a set of Edelbrock valve covers. Well in the box that had the valve covers in it, I find this little slip of paper that has cam specs on it. Says it's a SBF hydraulic roller cam with the HO firing order, so I'm assuming that it's in the car. Valve lift is .498"/.498" and duration @ .050" is 220°/220°. Now, don't you think this cam would be decently noticeable? I mean when I first got it and listened to it idle I kind thought it had a little lump to it, but wasn't sure. I think the exhaust is stock, this would probably make it harder to notice.

EDIT: Just thought of something. If this car is cammed, how well would the above specs work with speed density? Because the car runs and idles fine.
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Apr 17, 2006
#2
  • Apr 17, 2006
  • #2
Looks kind of like Ecam specs...if it runs ok leave it, nothing wrong with a few extra ponies in the car.
 

88 Fox GT

Active Member
Nov 18, 2002
1,674
0
36
Iowa
Apr 17, 2006
#3
  • Apr 17, 2006
  • #3
DMAN302 said:
Looks kind of like Ecam specs...if it runs ok leave it, nothing wrong with a few extra ponies in the car.
Click to expand...
I never thought about taking it out, just curious on how noticeable this kind of cam would be. I am not even sure if it's in the car or not. lol

EDIT: Just looked up E303 cam specs and they are exactly the same. Looks like whoever bought the cam wanted a cheaper cam with the same specs as an E303.
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Apr 17, 2006
#4
  • Apr 17, 2006
  • #4
With stock heads and intake the cam will net you in the area of 10-15 HP for a stick..bit more if the heads and intake are upgraded. I would be looking to a MAF conversion before doing anymore moding in with the heads or intake.
 
You must log in or register to reply here.

Similar threads

D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
525
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
A
2001 Cobra Cam Bolt Flew Out
  • Aamer309
  • Nov 10, 2026
  • SVT Tech Forum
Replies
3
Views
125
SVT Tech Forum Saturday at 1:23 PM
highplace11
H
9
Does anyone else have a combo close to this
  • 90Stanger302
  • Dec 10, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
348
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 25, 2025
Qtrhrse23
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?