I have my Cam Research Custom Hydraulic Roller Cam for sale.
Gross Valve Lift Intake .555 Exhaust .555
Adv Duration Intake .290 Exhaust .290
Duration @ .050 Intake .230 Exhaust .230
Lobe Lift Inches Intake .348 Exhaust .348
Lobe Seperation 112*
With a 1.6 Roller Rocker it is .557 Lift
I ran this cam in a stock bottom end, Edlebrock Performer 1.90 Valve Head car. With standard bolt ons the car went 11.76 @ 116 MPH Natrually aspirated.
It is too small for the direction I am going with the new motor.
It is still in the Short Block so I do not have a picture of it!
Looking for $125.00 for it.
Gross Valve Lift Intake .555 Exhaust .555
Adv Duration Intake .290 Exhaust .290
Duration @ .050 Intake .230 Exhaust .230
Lobe Lift Inches Intake .348 Exhaust .348
Lobe Seperation 112*
With a 1.6 Roller Rocker it is .557 Lift
I ran this cam in a stock bottom end, Edlebrock Performer 1.90 Valve Head car. With standard bolt ons the car went 11.76 @ 116 MPH Natrually aspirated.
It is too small for the direction I am going with the new motor.
It is still in the Short Block so I do not have a picture of it!
Looking for $125.00 for it.