• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Cam Selection Help

  • Thread starter Thread starter gtcobra302
  • Start date Start date Nov 28, 2005

gtcobra302

Member
Sep 6, 2005
118
1
16
Centra Florida
Nov 28, 2005
#1
  • Nov 28, 2005
  • #1
Hey
I know there are about a million threads about cam selection help out there but I need a straight answer if you guys dont mind. I have an 89 mustand gt, 5-speed, trickflow upper and lower intake streetheat, 75 mm throttle body and spacer, 73 mm mass air flow sensor, 24 lb injectors, adjustable fuel regulator, ported and polished gt40 heads, recient rod and main bearings and rings, k and n filter, no smog equipment, equal length headers, 2.5 inch h pipe, msd 6al box, msd cap, rotor, wires, and blaster coil. Here is my problem, I have a ford racing f303 cam in it. I am not sure if that is the problem but it only ran 14.0 seconds at the track the other night. Before the heads it ran a best of 14.2. 12 degrees and 40 psi of fuel pressure w/o the line. I have reciently come to findout that it is a good supercharger cam not a n/a cam. I have heard that a B303 is a better choice. Any truth to that? HELP please. This thing should be running 12.50. what the hell.
thanks
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Nov 28, 2005
#2
  • Nov 28, 2005
  • #2
What was your 60ft and mph? There are better cams out there than both of those.
 

gtcobra302

Member
Sep 6, 2005
118
1
16
Centra Florida
Nov 28, 2005
#3
  • Nov 28, 2005
  • #3
2.0 and 2.1's, I know they should be down around 1.7. I am running Lake wood traction bars, 3.55 gears, and hoosher quick time pro's, a steeda short shifter, frame connectors and like I said the damn thing should run 12.5 all day long.
 

stang5093

New Member
Nov 27, 2005
33
0
0
East Haven CT
Nov 28, 2005
#4
  • Nov 28, 2005
  • #4
I had a Trickflow stange 2 cam in my old 331, I lived it made great power when my motor was N/A just a thought
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Nov 28, 2005
#5
  • Nov 28, 2005
  • #5
Even if the F isn't optimal, it should be much quicker. There are stock head/cam/intake cars that run mid-high 12's as I'm sure you know.

I'd try to find out WHY it's running the way it is before I went swapping the cam. Something is wrong. Did you degree the cam during install? Have you pulled the diagnostic codes out of the computer? Did you make all the changes at once -- did it ever run quicker with only some of the mods? Just curious if there were things you JUST changed, and then the performance went backwards on you. If so -- obviously, it's those mods you want to take a close look at.

If you didn't degree the cam -- then you don't know what the cam timing is -- and that being off can drastically impact performance.

Lastly - I'd think that cam with the other mods would like A LOT more ignition timing.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Nov 28, 2005
#6
  • Nov 28, 2005
  • #6
Even if the F isn't optimal, it should be much quicker. There are stock head/cam/intake cars that run mid-high 12's as I'm sure you know.

I'd try to find out WHY it's running the way it is before I went swapping the cam. Something is wrong. Did you degree the cam during install? Have you pulled the diagnostic codes out of the computer? Did you make all the changes at once -- did it ever run quicker with only some of the mods? Just curious if there were things you JUST changed, and then the performance went backwards on you. If so -- obviously, it's those mods you want to take a close look at.

If you didn't degree the cam -- then you don't know what the cam timing is -- and that being off can drastically impact performance.

Lastly - I'd think that cam with the other mods would like A LOT more ignition timing.
 

gtcobra302

Member
Sep 6, 2005
118
1
16
Centra Florida
Nov 28, 2005
#7
  • Nov 28, 2005
  • #7
Nope put the cam in straight up. I just reciently saw that the rubber was squeezed out of both sides. I think maybe that could have some thing to do with it.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Nov 28, 2005
#8
  • Nov 28, 2005
  • #8
"...put the cam in straight up..." Did you use a degree wheel and a dial indicator? If not....then we don't know what the cam timing is - and that's potentially a big variable.

Rubber squeezed out of the damper? That might cause vibrations and the ignition timing to be WAY off - which could cause significant performance degradation.
 
You must log in or register to reply here.

Similar threads

1
Crank no start on a turbo and cammed pushrod 5.0
  • 1630stri
  • Sep 2, 2026
  • Digital Self-tuning Forum
Replies
2
Views
208
Digital Self-tuning Forum Sep 16, 2026
Qtrhrse23
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
242
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
A
Help ID - Turbo GT, SVO differences
  • aldoelmalo
  • Jun 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
208
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 2, 2026
aldoelmalo
A
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
842
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?