hey guys i finally registered here so that i can post although i have been reading these threads for a while( very good info by the way).i have a question on a camshaft i recently bought a used motor to build turned out it has been built before.I tore down a found it has some 030 speed pro forged pistons and a set of 65 289 heads with roller rockers and a gear drive.that isnt bad for 300 bucks!The thing is i can't idenify the cam on the end all it has is E 1L11.The block is a 91 mustang and it is a roller cam just can't do any good with those numbers.Maybe 1 of guys have seen or heard of that. thanks in advance!!