Can I put a 88 short block in a 94 Gt?

voodoo

Founding Member

Feb 16, 2001

102

0

0

Pensacola, Fl

Dec 14, 2003

#1

• Dec 14, 2003

• #1

I just bought a very very clean short block. It came from a 88 LX 5.0 that was a 1 owner car with 80,000 miles. You can see the hone marks from the factory!
I was going to do a 2.3 to 5.0 swap in my 90 LX but I figured if I could put this thing in my 94 then I could use that engine for the 90. So can I use it for the 94 GT? It seems like a stupid question to me but I wanted to ask anyway. Thanks for any info
Cory

 

DougNuts

Founding Member

Jul 11, 2000

2,596

0

47

Georgetown Ky

Dec 14, 2003

#2

• Dec 14, 2003

• #2

Yes, you can use the shortblock. I don't know what else you have on it, but some stuff, like the water pump is different. If it's just the block and rotating assembly, you're good to go.

 

voodoo

Founding Member

Feb 16, 2001

102

0

0

Pensacola, Fl

Dec 14, 2003

#3

• Dec 14, 2003

• #3

The guy I bought it from bought a 351 crate motor. The heads came with it but I'll be changing those. It came with a brand new waterpump, oil pan, and timing cover and balancer. All brand new from the crate engine. He said all of them were for an explorer. I'll give these away for free if you or anyone you know needs them. Thanks for the info. I figure I can put this in and it will be alot stronger than my current 146,000 mile motor.

 

J

jetuomi

Founding Member

Jan 30, 2002

1,464

0

0

Toronto, ON

Dec 14, 2003

#4

• Dec 14, 2003

• #4

hey, what about the accessories? doesn't the 94 block have the accessories right on the block vs. the older blocks use some kind of bolt-on framing???

 

voodoo

Founding Member

Feb 16, 2001

102

0

0

Pensacola, Fl

Dec 14, 2003

#5

• Dec 14, 2003

• #5

which ones are you talking about. On my current set up I have the egr tube that runs to the heads blocked off and the smog pump bypassed other than that what is there?

 

voodoo

Founding Member

Feb 16, 2001

102

0

0

Pensacola, Fl

Dec 14, 2003

#6

• Dec 14, 2003

• #6

oh yeah I am going to take out the ac if I put the new short block in

 

Rootus

Officially Addicted

Feb 8, 2003

6,659

1

0

Portland, Oregon

Dec 14, 2003

#7

• Dec 14, 2003

• #7

The shortblock itself is no different. You'll need to use the front accessory brackets from the 94/95, as well as the distributor. But that's not part of the shortblock anyway

Dave

 

voodoo

Founding Member

Feb 16, 2001

102

0

0

Pensacola, Fl

Dec 15, 2003

#8

• Dec 15, 2003

• #8

Thanks for the replies everyone. I'll be getting a different cam, prob a b303 from my parts guy he sells them for 182.00 shipped. Anyone know where I can get some better than stock heads for cheap or a 94-95 cobra intake. anyway thanks for all the help.

 

J

jetuomi

Founding Member

Jan 30, 2002

1,464

0

0

Toronto, ON

Dec 15, 2003

#9

• Dec 15, 2003

• #9

HairyCanary said:

The shortblock itself is no different. You'll need to use the front accessory brackets from the 94/95, as well as the distributor. But that's not part of the shortblock anyway

Dave

Click to expand...

thanks ! I always wondered about that.. now I know (and knowing is half the battle.. haha)...