VibrantRedGT "STANGNET'S PENGUIN SMACKER" 15 Year Member Nov 29, 1999 14,679 424 154 Boca Raton, Florida Nov 28, 2005 #1 Nov 28, 2005 #1 For those who have this or know about it. The dipstick housing is longer than the dipstick tube. I'm guessing I have to cut the housing but how much. Why would it come like this?
For those who have this or know about it. The dipstick housing is longer than the dipstick tube. I'm guessing I have to cut the housing but how much. Why would it come like this?
bjl95mustang Founding Member Jan 18, 2000 1,495 0 36 Austin,TX Nov 28, 2005 #2 Nov 28, 2005 #2 I just left mine alone. It shouldent affect the checking of the level.
95strokerPSU Member Jul 29, 2004 986 1 19 Sacramento from Philly Nov 28, 2005 #3 Nov 28, 2005 #3 Yeah I didn't have to modify mine at all.
zenboy99 Founding Member May 12, 2002 2,212 0 47 Madison, WI Nov 28, 2005 #4 Nov 28, 2005 #4 Vib, how did that pan fit in the k-member? My friends and I had to chop a stock Fox k-member to get it to fit. What part number was your pan?
Vib, how did that pan fit in the k-member? My friends and I had to chop a stock Fox k-member to get it to fit. What part number was your pan?
VibrantRedGT "STANGNET'S PENGUIN SMACKER" 15 Year Member Nov 29, 1999 14,679 424 154 Boca Raton, Florida Nov 28, 2005 #5 Nov 28, 2005 #5 I'm not sure about the pan part number. The K-member is fine all around it. My concern is the front portion. Its just about laying on the rack/pinion.
I'm not sure about the pan part number. The K-member is fine all around it. My concern is the front portion. Its just about laying on the rack/pinion.
bjl95mustang Founding Member Jan 18, 2000 1,495 0 36 Austin,TX Nov 28, 2005 #6 Nov 28, 2005 #6 with my engine it barley touched the rac tubes and i have about 1/2 clearance
greenlantern Member Jul 11, 2004 265 1 17 St Louis Mo Nov 29, 2005 #7 Nov 29, 2005 #7 Didn't need to modify mine either.