• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Car being Dyno'ed this week predictions??

  • Thread starter Thread starter smokin00GT
  • Start date Start date Mar 16, 2008
  • 1
  • 2
Next
1 of 2 Next Last

smokin00GT

New Member
Mar 22, 2007
80
0
0
United States
Mar 16, 2008
#1
  • Mar 16, 2008
  • #1
I have a mod list that is just rediculously long, so I will start with the important stuff. Last spring I had the car on the dyno it made 576 hp and 499 tq with the following items:

Forged bottom end also bored and stroked to 5.0L
Novi 2000 with 2.9RR pulley and 6 rib belt set up Made 13#s of boost
C&L plenum and 70MM throttlebody
Stage 3 blower cams
Ported and polished heads
Anderson Motor sport power pipe
Cobra Tank and dual pumps
Kenne bell boost a pump
60lb injectors

This winter I changed the pulleys to an 8 rib
added P-51 intake
added Blue Oval fuel Rails
Changed the supercharger pulley to a 2.65RR
Got a 10% overdrive pulley

The dyno is a dyno jet and all numbers are rwhp and rwtq. So what do you guys think she'll do? Feedback is much appricated.
 

MyBloodRunsBlue

New Member
Feb 1, 2007
127
0
0
Mar 16, 2008
#2
  • Mar 16, 2008
  • #2
660 hp/ 580 tq
 

Tim2002GT

Founding Member
Apr 10, 2002
635
4
29
Tulsa, Oklahoma
Mar 16, 2008
#3
  • Mar 16, 2008
  • #3
620 rwhp-550 ft/lbs tq.
 

smokin00GT

New Member
Mar 22, 2007
80
0
0
United States
Mar 16, 2008
#4
  • Mar 16, 2008
  • #4
MyBloodRunsBlue said:
660 hp/ 580 tq
Click to expand...

Dang!!! I sure hope so, but I doubt it will be that high. I am so excited I can't hardly stand it!!!!!
 

fobra559

At least it's more erect and not floppy anymore.
Nov 1, 2007
721
0
0
Lindsay, CA
Mar 16, 2008
#5
  • Mar 16, 2008
  • #5
640hp and 670tq
 

BennyBlown2v

New Member
Dec 9, 2004
1,233
1
0
Carmel, INdiana
Mar 16, 2008
#6
  • Mar 16, 2008
  • #6
634hp/568tq
 

MyBloodRunsBlue

New Member
Feb 1, 2007
127
0
0
Mar 16, 2008
#7
  • Mar 16, 2008
  • #7
i'm telling you, i got a feeling
 

Stan Weiss

Member
Dec 8, 2006
347
2
16
Philadelphia, PA
Mar 16, 2008
#8
  • Mar 16, 2008
  • #8
630 rwhp 550rwtq
 

lvmustanggt

New Member
Apr 9, 2006
721
0
0
Las Vegas
Mar 17, 2008
#9
  • Mar 17, 2008
  • #9
ditch the supercharger and get turbo. 650rwhp and 700tq
 

ADRENLN

Active Member
Apr 16, 2003
2,342
3
49
NJ
Mar 17, 2008
#10
  • Mar 17, 2008
  • #10
646rwhp - 534rwtq


good luck!!!!!! you have an awsome set up. mine will be close to the same but im not taking it that far with the overdrive pulley.......i dont think. i will prob never run more then 20 psi. good luck to you though. i hope things all go well.
 

smokin00GT

New Member
Mar 22, 2007
80
0
0
United States
Mar 17, 2008
#11
  • Mar 17, 2008
  • #11
lvmustanggt said:
ditch the supercharger and get turbo. 650rwhp and 700tq
Click to expand...

Why I am doing just fine with my Novi set up?
 

lvmustanggt

New Member
Apr 9, 2006
721
0
0
Las Vegas
Mar 17, 2008
#12
  • Mar 17, 2008
  • #12
smokin00GT said:
Why I am doing just fine with my Novi set up?
Click to expand...

You will make way more power with turbo That's what I want to have someday in my car.
 

smokin00GT

New Member
Mar 22, 2007
80
0
0
United States
Mar 17, 2008
#13
  • Mar 17, 2008
  • #13
lvmustanggt said:
You will make way more power with turbo That's what I want to have someday in my car.
Click to expand...

To each is his own I guess. I chose the novi, because it's something not many folks have, and because of where I worked at the time I got it at cost I don't think that I would be making tons more power with a turbo than I already am. At some point it stops becomming a street legal, perfect drivable, family toating car and turns into a drag car. I prefer to have a well rounded car for all occastions.
 

CobraRed_96_GT

Active Member
May 20, 2006
1,421
4
39
UCSD/La Jolla
Mar 17, 2008
#14
  • Mar 17, 2008
  • #14
i think with her set up the novi is actually better suited than a huge turbo, although with a turbo you wouldn't need a new rib kit under drive system or deal with belt slip, you'd adjust the boost and/or change out the piping size to adjust where peak psi hits
 

02LaserRed2V

New Member
Jul 30, 2004
379
1
0
Augusta, GA
Mar 18, 2008
#15
  • Mar 18, 2008
  • #15
652rwhp/611rwtq
 

CobraRed_96_GT

Active Member
May 20, 2006
1,421
4
39
UCSD/La Jolla
Mar 18, 2008
#16
  • Mar 18, 2008
  • #16
02LaserRed2V said:
652rwhp/611rwtq
Click to expand...

old tradition i see
 

EPIK

Member
Jul 3, 2004
796
1
16
LEFT COAST
Mar 18, 2008
#17
  • Mar 18, 2008
  • #17
02LaserRed2V said:
652rwhp/611rwtq
Click to expand...

Thats pretty funny, 1 less hp/tq than your car....

I couldnt guess myself, but good luck with your tune.....

AH, what the hell, how bout 632rwhp & 556rwtq....
 

smokin00GT

New Member
Mar 22, 2007
80
0
0
United States
Mar 21, 2008
#18
  • Mar 21, 2008
  • #18
Car made 641hp so far. We didn't get to finish because the maf acts like it is pegging. We took it out on the street and the car overheated!!!! I am very disappointed right now. I hope it didn't blow a head gasket.
 

joshjwc9

Active Member
Jun 12, 2006
1,095
17
39
Palm Harbor, FL
Mar 21, 2008
#19
  • Mar 21, 2008
  • #19
That sucks big time!

Good Luck finding the issue with the overheating..
 

georgio440

Member
Nov 22, 2007
195
0
17
Walnut Creek, CA
Mar 21, 2008
#20
  • Mar 21, 2008
  • #20
A LOT!
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

S
For Sale 2003 Cobra Redfire Convertible
  • SpectorV
  • Feb 20, 2019
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
5K
SN95 Mustangs For Sale (1994-04) Feb 20, 2019
SpectorV
S
  • Locked
Just Some Suggestion's For Foxes
  • Detroiit
  • Jul 24, 2014
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 25, 2014
Noobz347
B
  • Locked
Expired 00/03 Cobra Clone Fully Built Street/track Monster Kenne Bell
  • BOSS GT
  • Aug 20, 2013
  • SN95 Mustangs For Sale (1994-04)
Replies
4
Views
12K
SN95 Mustangs For Sale (1994-04) Oct 29, 2013
BOSS GT
B
K
  • Locked
03 Kenne Bell Cobra 28k miles $21500
  • kculfoelcric
  • Nov 25, 2010
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
6K
SN95 Mustangs For Sale (1994-04) Nov 27, 2010
kculfoelcric
K
M90 root blower how to info
  • 1987LXragtop
  • Jan 7, 2011
  • SN95 V6 Mustang Tech
Replies
1
Views
8K
SN95 V6 Mustang Tech Jan 7, 2011
1987LXragtop
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?