• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

car does not want to run right

  • Thread starter Thread starter rgreen86
  • Start date Start date Sep 14, 2006
R

rgreen86

New Member
Aug 7, 2006
4
0
0
Sep 14, 2006
#1
  • Sep 14, 2006
  • #1
i have a 95 mustang gt. when i am driving my car and hit 3500-4000 rpms my car starts to hesitate. i had this problem when i first got it and it went a way when i replace the coil, plug wires, plugs, distibuter cap and rotor. i just recently replaced valve cover but when i put intake and others back on it started again. i drove it for about an hour and i noticed it had no power when i gave it any gas. i looked the engine over and i accicdently unplugged a fuel injector. i plugged it in and it still has a hesitation at high rpms.


thanks
 

Bosko5.0

Active Member
May 18, 2006
1,067
0
37
longwood, FL
Sep 14, 2006
#2
  • Sep 14, 2006
  • #2
did you change the fuel filter, if not you should change it, also check the ohms of the injectors should be 13.5-19 ohms
 
F

fordtech28

Member
May 12, 2006
312
0
17
Riverside Cali.
Sep 15, 2006
#3
  • Sep 15, 2006
  • #3
rgreen86 said:
i have a 95 mustang gt. when i am driving my car and hit 3500-4000 rpms my car starts to hesitate. i had this problem when i first got it and it went a way when i replace the coil, plug wires, plugs, distibuter cap and rotor. i just recently replaced valve cover but when i put intake and others back on it started again. i drove it for about an hour and i noticed it had no power when i gave it any gas. i looked the engine over and i accicdently unplugged a fuel injector. i plugged it in and it still has a hesitation at high rpms.


thanks
Click to expand...

check everything over you might have a vacuum leak somewhere and check all the injectors again you might have another one that isn't plugged in right and unplug the battery for ten mins and plug it back it the computer might still think the injector is unplugged still.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 15, 2006
#4
  • Sep 15, 2006
  • #4
Did you retrieve codes? A code be help with diagnostics (the CEL does not need to be on for a code to be stored in the KAM, and this kind of issue very well might NOT light off a CEL).

Good luck.
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
236
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
L
Help with 1986 GT 5 Speed Please
  • Lcasada1999
  • Mar 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
258
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
681
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Engine Hiccup at full throttle
  • keel
  • Jun 2, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
30
Views
559
Fox 5.0 Mustang Tech Jun 10, 2026
Noobz347
T
Help with a 95 5L crank no start
  • TheBubbaJoe
  • Nov 4, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
446
1994 - 1995 Specific Tech Nov 5, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?