• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

car hesitates or stumbles

  • Thread starter Thread starter my86GT
  • Start date Start date Sep 19, 2007
M

my86GT

New Member
Jul 2, 2003
22
0
0
Mineola, texas
Sep 19, 2007
#1
  • Sep 19, 2007
  • #1
when i start my car and go down the road it hessitates or stumbles like its not getting fuel then it will go away. it seams it does this everytime i start the car once it goes away it wont come back till i restart it. im just confused those this sound like the fuel pump is going out or what?. i ran codes KOEO and all i get is code 95 ive errased it 2 times but it keeps coming back. can someone please help me with this its really making it frustrating driving the car.

thank you
Hugo
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Sep 19, 2007
#2
  • Sep 19, 2007
  • #2
Does this only happen when the car is started cold...or will it happen when the car is started hot as well? My car used to do this also...especially when it was cold. After tuning the car with a tweecer and deleting the EGR and Thermactor systems...the problem has gone away. Are you running EGR? Do you have a check engine light or is this code stored in KAM?
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Sep 19, 2007
#3
  • Sep 19, 2007
  • #3
My 5.0L notchback had stumbling problems in higher RPM's. My plugs were worn out to .070!!!! I bought new Motorcrafts gapped them at .048 instead of the manufacturers .054. My car runs great. But, unlike your car, mine ran fine at start up at under 4,800 RPM's.
 
M

my86GT

New Member
Jul 2, 2003
22
0
0
Mineola, texas
Sep 19, 2007
#4
  • Sep 19, 2007
  • #4
it does it hot or cold, im not running EGR. i have an EGR dummy plug that makes the computer think there is one there and working fine.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Sep 19, 2007
#5
  • Sep 19, 2007
  • #5
check your plug gap and have a look at the voltage your TPS is sending. It could be an issue with it sending the wrong info to the computer when you accelerate.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 19, 2007
#6
  • Sep 19, 2007
  • #6
Code 95 - the following test path is for 86-90 model Mustangs.

The 95 code is because at one time or another, the fuel pump relay hiccupped and didn't provide power the pump when the computer told it to run. Sometimes this is a one time thing, other times it is a no run or runs poorly condition.

To help troubleshoot the 95 code, follow this link for a wiring diagram http://www.autozone.com/images/cds/gif/large/0900823d80167162.gif


Using the diagram, check the red/black wire from the fuel pump relay: you should see 12 volts or so. If not, check the inertia switch: on a hatch it is on the driver’s side by the taillight. Look for a black rubber plug that pops out: if you don't find it, then loosen up the plastic trim. Check for voltage on both sides of the switch. If there is voltage on both sides, then check the Pink/black wire on the fuel pump relay: it is the power feed to the fuel pump. No voltage there, check the Orange/Lt blue wire, it is the power feed to the fuel pump relay & has a fuse link in it. If there is good voltage there & at the Pink/black wire, swap the relay.

Some Mass Air conversions neglect to run the extra fuel pump wire, and they always have a 95 code. See http://www.stangnet.com/tech/maf/massairconversion.html for more information on the Mass Air wiring conversion.
 
M

my86GT

New Member
Jul 2, 2003
22
0
0
Mineola, texas
Sep 19, 2007
#7
  • Sep 19, 2007
  • #7
ill go and check out the diagram you sent me and let you know how it comes out. when i did my conversion i did run that wire from the fuel pump relay to the #19 pin hole. TPS is reading .98v so i should be there and the plugs are gapped right.
 
M

my86GT

New Member
Jul 2, 2003
22
0
0
Mineola, texas
Sep 19, 2007
#8
  • Sep 19, 2007
  • #8
i did the check, i have power to the red/black wire when i turn the key to the on position and nothing on the off. is this how it should be, ive replaced the fuel relay yesterday so it has already a new one in it.
 
M

my86GT

New Member
Jul 2, 2003
22
0
0
Mineola, texas
Sep 19, 2007
#9
  • Sep 19, 2007
  • #9
ttt
 
M

my86GT

New Member
Jul 2, 2003
22
0
0
Mineola, texas
Sep 20, 2007
#10
  • Sep 20, 2007
  • #10
still having no luck
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
527
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
S
Idles great, but stumbles when driving
  • Stang9050
  • Oct 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
928
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 8, 2025
Mcmahst
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
405
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?