Car not starting...

Ok I just finished swapping in a 351w and am trying to start it for the first time...

Problem one. The Fuel pump won't prime when I turn the key. I checked all the grounds and everything, all look good. However... It does turn on if I pull the relay and use a jumper wire to jump the terminals. I don't have a test light or anything here as they are at work atm so can't tell if im gettin power at the control side of the relay.


Ok so I left the jumper wire in the relay so that the fuel pump is always on. Turned the key and still nothing. I am getting spark also so I know its not that. What else can I look for that would not let it start?

Ok well I did some tests and got a little farther. I found a easy sneaky method of checking if the injectors are turning on or not. I read somewhere that you can use an old injector and hood it up to shop air through the top then stick the bottom in a cup of water and crank it. If you got air bubbles coming out then you got injector fire, and I got that. It still ain't starting though even with jumping the fuel pump relay and having it run constantly. However... I may have found something that be a problem.. I took the distributor out again just to make sure my timing wasn't off or something stupid and when I took the number 1 spark plug and cranked it to wait for the compression stroke, the numbers on the balancer off the crank are like a quarter turn away from the marker.. So im hoping my timing chain didn't jump a tooth or anything, Idk what to look for for that problem... Any help will be appreciated as this thing is getting frustrating..