• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Car Wont Start...HELP

  • Thread starter Thread starter mustang351
  • Start date Start date Jun 25, 2007
M

mustang351

New Member
May 29, 2004
102
0
0
Wareshoals
Jun 25, 2007
#1
  • Jun 25, 2007
  • #1
I dont know what is wrong I just did a rebuild on the motor and it is supercharged. After putting everything back together it cranked up fine. I went back and forth to work not getting into it letting the motor break in. Well When I felt comfortable that everything had broken in 500miles later. I decided to see what it had and it sucked. I installed an F cam in the process and timing is at 10 degrees. Well anyways below 3200 rpms it felt like something was pushing the car back and then it would go pretty good after you got above 3200. Well I was coming home the other night and decided to get on it one more time and I didnt even really get on it and the car makes a pop noise and shuts off. And now it want even try to start. I have checked fuses, blower hoses, MAF and I dont know what it is. I did notice when I took the upper intake off that there was a little more oil in it than it should have. I am clueless???? Any Ideas and has anyone had this power loss situation I mean I swear the car was faster before the blower.
 
C

chuck943

New Member
Oct 26, 2002
262
0
0
north carolina
Jun 25, 2007
#2
  • Jun 25, 2007
  • #2
how is the ground from block to chassis? did you hook the strap back up?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 25, 2007
#3
  • Jun 25, 2007
  • #3
I'm kinda lost. When you say it won't even try to start, that means it wont crank, right?
 
P

paxton86

New Member
Dec 29, 2005
38
0
0
Oct 29, 2007
#4
  • Oct 29, 2007
  • #4
did you figure this out? my car made the same pop and die thing a while ago and i cant get it to start for anything. i replaced the coil, ignition module, and distributor cap and it will still turn over but not start
 
You must log in or register to reply here.

Similar threads

L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
223
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
Fox won't crank over and fuel pump won't kick on.
  • djj62478
  • Jun 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
364
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 11, 2026
General karthief
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
319
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
K
Resolved Need some assistance. Holley Terminator X alongside H/C/I. Very rough/inconsistent idle
  • karhoot
  • Jun 6, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
101
Fox 5.0 Mustang Tech Jun 6, 2026
karhoot
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?