arkansaw man...no emissions...engine is a 306, aluminum heads, aluminum edlebrock performer rpm...10 - 11 to 1 compression...forged pistons balanced and blueprint block...mated to a t-56 tranny, 3.73 hears...long tube headers into x pipe to off road 1 chambers ( tiny muffler ) and exit out through the back with the old school fox body 2 1/2 inch crome axle back...its going to be extremly fun......
and the carb is a Holley 650 double pumper....
tubeular K-member, tubular A arms, adjustabe coilovers (f), (r) is a fully adjustable strust with a eibach sportline springs, upper and lower control arms...
holley blue external electric pump, also going to run a fuel pressure regulator, and a wideband O2 gauge....i work with alot of drag car, and dirt track car people...