I just did mine a few weekends ago w/ a friend and it wasent to hard. When you get it take it out of the box it will be all stuffed in there and let it air out for awhile. Take out the seats, center console, unbolt where the seat belts go into that are between the seats and the console, you need a torx bit to do that I belive its a 45 that will also undo the brackets that hold down the rear seat belts. Take off the kick pannels as well. When putting it in the most PITA part was cutting the holes for the bolts in the seat, cut the holes big enogh the first time around so your not going back to have and do it again. If you have any questions feel free to PM me the process is still pretty clear in my head since I just did it.