Anyone in here install their own?How simple/difficult was the install?Would really appreciate any feedback...I personally have done most suspension jobs on my own from springs,brakes,shocks,ect...But never any Caster/camber plates....Thanks again for any feedback on this guys...
Installation is simple enough although some brands don't come with new boots for the struts, so unless you've changed them in the past you'll need to get a set. Keep in mind as well that an alignment should be in order afterwards. Toughest part is getting the top strut nut off....
i installed my own, they were kind of a pain, but i think that also had to do with swapping to '95 spindles on an '84 which has a narrower track than the '87-up...now, my plates are all the way in and I can only get 0.3* neg camber on either side-ptooey!
next suspension mod: tubular k member, arms, and coil overs with good struts and shocks!
They are easy. 3 of the 4 sets I've done on my cars have been done in conjunction with a K-Member, Arms, Coilovers, and manual steering. If you plan doing that stuff anyway its probably a good time to break out the plastic. Heck, its always a good time to break out the plastic!