Cel: P1443

Sick96Stang

New Member
Aug 20, 2004
621
0
0
Gilbert, Arizona
I'm throwing the check engine light code P1443. I know it is small or no purge flow condition. Just wondering if anybody knows what some common causes are for throwing this code and how to fix it? I have an O/R H-pipe with MIL's and I have a SCT with the rear o2 sensors turned off.
 
u need to change 2 small parts i think. Its a small solenoid and a sensor stemming from the back of the stock plenum. Follow the small red strip hose to the 2 parts connected to it. Should goes alonge the firewall to the passenger side fender.
 
Hey man, I do believe this would be the problem. Change these and you should be set.
1)Part# E6ZZ-9C915-A :It's the small plastic valve on a vacuum hose directly behind the TB against the firewall
2)Part# F57Z-14A606-BA: This is a metalic cylinder with a connector on one end and a T on the other. Make sure you put the vacume line on the right side as flow direction does matter. This one is located under the AC Canister on the same line as the first valve.

Hope this helps. Takes like 5-10 min to do :nice:


__________________