• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Check coolant light?

  • Thread starter Thread starter gibbs1820
  • Start date Start date Jun 24, 2005
G

gibbs1820

New Member
Oct 6, 2003
27
0
1
Massachusetts, USA
Jun 24, 2005
#1
  • Jun 24, 2005
  • #1
I just had the engine coolant flushed and filled yesterday.
On my way into work this morning while on the highway, the check coolant light came on. What gives? Any ideas?
 
R

Roger_4.6_96

Founding Member
Jul 16, 2002
1,209
0
0
Reno,NV
Jun 24, 2005
#2
  • Jun 24, 2005
  • #2
They probally didnt add enough coolant. Just add some more in there
 
R

rjstaaf

Founding Member
May 31, 2002
1,310
2
39
Somewhere
Jun 24, 2005
#3
  • Jun 24, 2005
  • #3
Sounds like a pocket of air is trapped in the system. Watch your temperature closely.

Here is Ford's procedure for bleeding air from the system.

Bleeding

1. Select the maximum heater temperature and blower motor speed settings. Position the control to discharge air at A/C vents in instrument panel.
2. Start the engine and allow to idle. While engine is idling, feel for hot air at A/C vents.
3. CAUTION: If the air discharge remains cool and the engine coolant temperature gauge does not move, the engine coolant level is low and must be filled. Stop the engine, allow the engine to cool and fill cooling system. Start the engine and allow it to idle until normal operating temperature is reached. Hot air should discharge from A/C vents. The engine coolant temperature gauge should maintain a stabilized reading in the middle of the NORMAL range. The upper radiator hose should feel hot to the touch.
4. Shut the engine off end allow the engine to cool.
5. Check the engine for coolant leaks.
6. Check the engine coolant level in the degas bottle/coolant expansion tank and fill as necessary.
 

GDawg

Founding Member
Mar 22, 2002
1,469
19
68
Nevada
Jun 24, 2005
#4
  • Jun 24, 2005
  • #4
You're sensor float is probably stuck...
 
You must log in or register to reply here.

Similar threads

Flushing water from the radiator and block.
  • djj62478
  • Oct 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
257
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 11, 2026
CAMTWO1070
L
Car has been overheating. Not sure what is causing it. Any help would be appreciated.
  • Luckysgirl
  • Jun 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
246
1996 - 2004 SN95 Mustang -General/Talk- Jun 2, 2026
Luckysgirl
L
J
Engine Coolant leak from oil filter
  • jr273
  • Mar 26, 2026
  • SN95 4.6L Mustang Tech
Replies
9
Views
383
SN95 4.6L Mustang Tech Mar 31, 2026
squeak93
J
2001 coolant issue
  • jr273
  • Jan 24, 2026
  • The Welcome Wagon
Replies
1
Views
219
The Welcome Wagon Jan 24, 2026
Noobz347
Engine Coolant boiling in hose?
  • Teen'93stang5.0
  • Jun 3, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
337
Fox 5.0 Mustang Tech Jun 8, 2026
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?