Choices of HIPO trans?

[D.Hearne]

No Trick Flow twisted wedge is the only head there is.....and it's manufacturer, don't you know anything.......

You mean Canfield's not the only aftermarket manufacturer of small block heads There's others ?

 

[gp001]

Well, nash and richmond aren't rated that high, I will check out the rest.

Thanks

Chris

If it's never gonna see slicks at the drags and you are running a 3.50 rear gear you will never break any of the trans listed above. Seems like you want to build for an occurance that will never happen

 

[Cbarton]

I think you misunderstood, I already have a tremec, IF I break that then the last thing I am going to do is replace it with another trans that is rated at a simular amount of torque.......and IF it breaks (like it did with my last mustang that made CONSIDERABLY less torque than this one will make) then I will need to find something with a higher rating, that's why I posted the question,

Never say never........

Chris

If it's never gonna see slicks at the drags and you are running a 3.50 rear gear you will never break any of the trans listed above. Seems like you want to build for an occurance that will never happen

 

[66P51GT]

I believe Cobra Automotive builds Top Loader transmissions with straight cut gears (aka Jerico internals). They are a pretty penny but nothing like shifting without depressing the clutch.

Check out the last video on the page: http://www.cobraautomotive.com/race_movies.htm and listen to what I'm talking 'bout!

 

[66P51GT]

With as much torque as you will have, your 3.50s will be fine. For the high-speed runs like the Silver State, you can always swap the rears for a set of 3.25s or lower to keep the RPMs and temperatuers down.