- Apr 23, 2017
- 7
- 0
- 1
hey guys put together my bottom end pistons and rods... anyone want to check my tolorances let me know if they are good..
main cap all across except middle with thrust bearing .002
thrust bearing was .0015
rod bearings all of them .0015
ring gap all checked to .0016 what was on the box for the hasting rings.
rod caps torqued to 19 pounds as per chilton manual.
crank end play was .001
main cap all across except middle with thrust bearing .002
thrust bearing was .0015
rod bearings all of them .0015
ring gap all checked to .0016 what was on the box for the hasting rings.
rod caps torqued to 19 pounds as per chilton manual.
crank end play was .001