Clutch cable routing

BDAWK2002 · Jul 12, 2005

Can anyone tell me how the clutch cable routes. I have tried numerous different way and cant find the two holes where the bracket is supposed to bolt to I'm doing a 5 spd swap so I'm not even sure if the holes are even drilled out already.....If someone could post some pics that would be a big help....Plus anyone who has done the swap before please let me know if the holes are already drilled out.....Thank's

95_5.0_stang · Jul 12, 2005

Wow, I'm in need of this same exact question. I did the v8/5speed swap so I need to know where to drill the hole and how to route the cable. If someone posts pics I will love you forever.

Grn92LX · Jul 12, 2005

http://forums.stangnet.com/showthread.php?p=5142451#post5142451

I have mine slightly different due to longtubes and a mcleod sfi bellhousing.

BDAWK2002 · Jul 12, 2005

Grn92LX said:
http://forums.stangnet.com/showthread.php?p=5142451#post5142451

I have mine slightly different due to longtubes and a mcleod sfi bellhousing.

Is that the same on a sn95?I tried it that way and it didnt fit right....

BDAWK2002 · Jul 12, 2005

95_5.0_stang said:
Wow, I'm in need of this same exact question. I did the v8/5speed swap so I need to know where to drill the hole and how to route the cable. If someone posts pics I will love you forever.

I think I found the holes on the fender support.It's right below where the brake lines run from the master cyl.

Green 94 5.0 · Jul 12, 2005

the hole is right where bdawk said and it is predrilled and threaded. as for the cable routing, it goes between the kmember and motor mount and from there into the clutch fork. during my swap, i took a ton of pics of everything. you can refer here for all of them.....maybe some of them could be useful. if you have any questions, also feel free to hit me up.

http://ridewithdrc.com/roger/mustang/

BDAWK2002 · Jul 12, 2005

Green 94 5.0 said:
the hole is right where bdawk said and it is predrilled and threaded. as for the cable routing, it goes between the kmember and motor mount and from there into the clutch fork. during my swap, i took a ton of pics of everything. you can refer here for all of them.....maybe some of them could be useful. if you have any questions, also feel free to hit me up.

http://ridewithdrc.com/roger/mustang/

Thanks for the info....I got the cable routed.Do you what size bolt holds the clutch bracket?And would you happen to know what size bolt holds the dust cover for the clutch fork?Thanks again for the help.

95_5.0_stang · Jul 12, 2005

Wow, I just went out and looked and I got the hole in the firewall already there, it was just plugged with a rubber grommet. Well, thanks for the help guys.

Clutch cable routing

BDAWK2002

New Member

95_5.0_stang

New Member

Grn92LX

Fidanza Man!

BDAWK2002

New Member

BDAWK2002

New Member

Green 94 5.0

BDAWK2002

New Member

95_5.0_stang

New Member

Similar threads

Clutch cable routing

New Member

New Member

Fidanza Man!

New Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency