• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch problems/T5 Swap

  • Thread starter Thread starter Goldcuffs
  • Start date Start date May 23, 2008
G

Goldcuffs

New Member
Mar 6, 2008
43
0
0
May 23, 2008
#1
  • May 23, 2008
  • #1
All right guys, before you start burning me I all ready know I fu#ked up buying cheap ass ****. (Now I will buy good stuff and chock it up to a lesson learned) First off I have a severe vibration in neutral or in gear accelerating. Feels like flywheel out of balance. Do they need to be balanced or is a good one ok out of the box? Second My clutch pedal is about 3-4 inches taller than my brake pedal and I had to load the hell out off the clutch fork to get the cable on. Now of course the clutch isn't fully engaging. It's a stock style cable with a BBK quad. Thanks in advance.
 
G

Goldcuffs

New Member
Mar 6, 2008
43
0
0
May 23, 2008
#2
  • May 23, 2008
  • #2
 
S

smokem331

New Member
May 21, 2008
5
0
0
phoenix, az
May 24, 2008
#3
  • May 24, 2008
  • #3
The flywheel should be balanced from the factory, but not to say it wasnt dropped on the way to the parts store or your house. When i changed my clutch on my 90 gt something was wrong with the cable. I ended up buying a bbk fully ajustable cable and quadrent.

For some reason that fixed it. the cable might of streched on me. The other thing might be you put the throw out bearing on wrong. I did that once a few years ago and it sounds like the same thing it was doing to me. I would pull the trans and make sure it s on right and the plate is on right.
 
G

Goldcuffs

New Member
Mar 6, 2008
43
0
0
May 24, 2008
#4
  • May 24, 2008
  • #4
Well, I can't post a picture because by the time I shrink it down to an acceptable size you can't see it. The C's are the clutch, the I's are the T/O and the F's are the fork. This is how I installed it. Thanks for the reply

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
IIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIII
FFFFFFFFFFFFFFFFFF IIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIII
 
G

Goldcuffs

New Member
Mar 6, 2008
43
0
0
May 24, 2008
#5
  • May 24, 2008
  • #5
Well, that didn't work. Imagine the I's and C's centered.
 
You must log in or register to reply here.

Similar threads

N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
716
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
593
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
T5 5th gear 89 gt
  • mac_55
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
279
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 20, 2026
Mustang5L5
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
320
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
297
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?