Clutch problems...Will this solve it ?

You mean, you turn the ignition and the car doesn't start unless the clutch is fully depressed?

Sounds like your safety switch is loose, or is ready to STB. I doubt a linkage kit will fix it.

i had a similar problem when i installed my king cobra on thhe 5.0. it would only start if you forced the clutch down as far as it could go. i got used to it

My wife's did the same thing when we bought it. I changed the clutch pedal neutral start switch and the problem was gone. She got tired of pushing the pedal through the floorpan with heels on. Beats me.....

Do you have to push the clutch that far down when shifting while driving? If it still has to move that far, then the cable/quadrant might solve your problem, if it shifts at a normal height while driving, look into what stangbear is saying. If you get a new cable, don't get an adjustable one, (adjustable cable, not firewall) the cables are all junk compared to non adjustable/stock.

The MM one is great, as long as you don't get their pedal relocation kit. It isn't compatable with their linkage kit with SPEC clutches, apparently. You don't want to know how I found that out. Other than that, it's about as good as it gets. I prefer the UPR extreme firewall adjuster, better than the MM one, IMO- which is saying alot, as I am a huge MM fan and have given them SEVERAL thousand dollars over the last few years. If your clutch isn't working right though, aside from the starting issue, it probably is that the stock linkage is shot, or out of adjustment at the least. It isn't uncommon for a new heavy duty clutch to be the straw that brakes the back of a seemingly healthy stock linkage assembly.

ive got the upr triple hook quadrant, and firewall adjuster with a ford oem cable. works great and is easy as crap to adjust

the switch for the starting is on the back of the clutch arm. mine is white. you can push the switch to adjust it. if the switch is getting toasty, once you bury the pedal while driving, it will reset back to its old self.

Jess, i am running dirty phrases through my mind - what is STB?

Stangfreak95 said:

Which one is it from UPR ? The triple hook quadrant or the quick-release ?

Click to expand...

Triple hook.

Stangfreak95 said:

Have you used both the MM quadrant and the UPR quadrant, to say that the UPR is better ?

Click to expand...

Yes. It isn't the quadrant that's better, it's the firewall adjuster. The MM Firewall adjuster is no better than any other one out there, after years of confidence in them I was very dissapointed with it. The UPR Extreme is a far superior and more innovative design, much as I hate to say it. As for the quadrant, that depends. I prefer the UPR triple pickup because of the extra tunability. The MM one is a single pickup, which posed a problem for me. I have a new SPEC clutch, and the MM clutch pedal relocation kit which moves it closer to the floor. I got the MM linkage kit thinking it would be the best there is, to get the upgraded stock cable from them as well as their re-engineered quadrant and their FW adjuster, thinking it's good to get them all from the same place. Well, there wasn't enough throw with their cable to disengage the clutch fully, even with the FW adjuster cranked all the way out. Since the OEM cables aren't adjustable, and the MM quadrant only has one pickup point, there was no way to tighten it any more than that. IMO, it isn't a versitile enough kit to be sold as a universal linkage solution. I spent several hours on the phone with most of their techs and the engineer who designed it, while installing and tweeking, turning wrenches to their instructions, only to find that we weren't able to make it work. With the Ford Fox Mustang OEM cable ( not the OEM Ford one they sell in the kit) it was better, but still not good enough for me. So I still needed to put my UPR triple pickup quadrant back in to tighten it enough to make it work smoothly. At this point, the only MM linkage part still installed was the FW adjuster, the only part I wasn't impressed with at all. So, I sent the whole kit back. They test their clutch parts with McCloud clutches exclusively- if we have any other type we're on our own. Now, with my OEM cable and UPR quadrant and FW adjuster, everything works as it should. I think in this one area, MM needs to go back to the drawing board before claiming theirs is the best. it may be if you have a McCloud clutch, or don't use the MM pedal relocator, otherwise it isn't anything special despite having some nice features.

HISSIN50 said:

Jess, i am running dirty phrases through my mind - what is STB?

Click to expand...

Sh*t The Bed.

SB, thanks. that is a new one on me.

*Note*
I didn't take the time to remove my MM pedal relocation kit, since there was no way I would perminantly remove it. That being said, I cannot say with impunity that the MM linkage kit isn't one of the best out there otherwise. It's probably fine. The kit has many innovative features that the others don't. The firewall adjuster however, isn't up to MM standards of excellence IMO.