I can get my hands on a cobra eaton m112 supercharger for cheap and someone said they will fit on any 4.6 block. Is this true? What else would i need to get my car running? What kind of power could i expect?
cobra blower on gt?
- Thread starter Ruckus46Gt
- Start date
no, it is not true. the intake ports on the 2V heads are different than the 4V heads. you'd need to get a new lower intake for it if Eaton even makes one.
i have no idea. i don't even know if Eaton makes one for the 2V. you should contact them to see if they have one.
GoBabyVroommm
Active Member
GoldnGT
Founding Member
I've read several places of 2V guys trying to put the 03 charger on their car and generally end up blowing their motor within two weeks.
Mike
Mike
kirkyg
Founding Member
why would they blow their motors?
As long as you dont push more than 8-9 pounds you should be fine. The problem would be fabrication to make it bolt on and also needing and intercooler setup would be VERY costly to design or finding 03 cobra parts etc. Just buy a KB kit and save yourself the trouble. A 6 pound non-intercooled kit would put out more power than the roots would anyways.
kirkyg
As long as you dont push more than 8-9 pounds you should be fine. The problem would be fabrication to make it bolt on and also needing and intercooler setup would be VERY costly to design or finding 03 cobra parts etc. Just buy a KB kit and save yourself the trouble. A 6 pound non-intercooled kit would put out more power than the roots would anyways.
kirkyg
2001Saleen181
New Member
- Mar 20, 2004
- 193
- 0
- 0
Unless you reprogram your ecm, upgrade your fuel pump and fuel injectors you will blow your motor.
Get a KB kit.
Get a KB kit.
kirkyg
Founding Member
Sorry...i assumed people knew you had to upgrade from 19 lbs injectors and get a better fuel pump. Thats common knowledge.
kirkyg
kirkyg
Been hanging on the Depot. Still like to come back and check out these PDB threads.
BLK_ROUSH
Founding Member
The 2V ROOTS blower technical expert. Welcome back Tom, wondered where you've been. Fabricating a new intercooler/intake or something?
BTW, can't we make a sticky on the Pros and Cons on trying to use the Cobra blower? This is becoming the "which exhaust,shifter" thread. Reoccuring and annoying.
BTW, can't we make a sticky on the Pros and Cons on trying to use the Cobra blower? This is becoming the "which exhaust,shifter" thread. Reoccuring and annoying.
BLK_ROUSH said:The 2V ROOTS blower technical expert. Welcome back Tom, wonered where you've been. Fabricating a new intercooler/intake or something?
BTW, can't we make a sticky on the Pros and Cons on trying to use the Cobra blower? This is becoming the "which exhaust,shifter" thread. Reoccuring and annoying.
Sort of - my project has been on hold since I bought my first house. I'm closing on June 18th so hopefully I'll be able to get back into it soon after.
Similar threads
