Hey guys. I am considering getting a Cobra grille insert for my GT to aid in cooling, but I want to know what installing it entails. If anyone has done this and would like to share, please do. I'd like to know what has to be modded, cut, drilled, glued, etc. Thanks guys and gals.
They give you a template with the kit of what you have to cut out of the front end. You trace it out, drill a big hole to get the saw in, and I used a jig saw with a fine blade and cut it out. Use masking tape around where you cut to keep paint chipping to a minimum, but if a little chips the insert will most likely hide it. You put the insert in, and its held in by 2 face tape and you have to drill 2 holes in the top and put two screws in the top for extra security. Its pretty easy to install.
heres how mine turned out....ill try to get more up if u want.....this is straight out of paint ...and the install was a piece of cake JUST TAKE YOUR TIME!