cobra intake gaskets

[aar0s]

Im needing to change the lower gaskets on my cobra intake, the ones go between the head, front and rear of the valley, and the lower intake and the one between the upper and lower. not having any trouble finding the upper to lower, their everywhere, its the lower ones i cant find. Ford has the kit for 65 bucks but i know there has to be a kit that dont cost that much.
Anyone know where i can find them?

 

[Mustang5L5]

Ask for ford explorer gaskets.

Or just ask for felpro 1250 gasket kit

 

[87GT Drop Top]

MS95952 Fel-Pro upper & lower kit.

 

[87GT Drop Top]

Ask for ford explorer gaskets.

Or just ask for felpro 1250 gasket kit

This is correct also. same part # as a 93 Cobra.

 

[aar0s]

I asked the guy on the phone and he tried to tell me that the explorer didnt come with a v8, i said thanks and hung up :facepalm:
ill get a price on those two gasket kits and get one ordered, thanks guys!

 

[87GT Drop Top]

Explorer came with a 5.0 from 96-01.

 

[1990Coupe]

on the felpro gaskets, do you guys use the quark gaskets for the front and rear lower intake seal or just use RTV silicone?

 

[aar0s]

Ive always been told to rtv the valleys, the cork gaskets wont hold. been so long since ive done it i cant remember if we rtv'd them or not.

 

[Mustang5L5]

I use the cork gaskets with rtv in the corner. I've always done this even though people say not too. I did this when I installed my cobra intake 9 years ago and it's still sealed up nicely.

I've also done a few friends cars this way and they are fine.

 

[BYRDPE]

Ive always been told to rtv the valleys, the cork gaskets wont hold. been so long since ive done it i cant remember if we rtv'd them or not.

get a can of "the right stuff" to use on the end rails...it's the ****zle.