cobra plaque

hsean · May 25, 2008

is there any other plaque that will fit the upper cobra intake ?i just bought an upper and lower intake with a plaque that needs replacing would like to have other options since my car will not be a cobra replica.

5.0Droptop · May 26, 2008

Look on ebay. I dont recall seeing any but if there is one youll find it there.

stykthyn · May 27, 2008

be prepared to pay about 100 or more for a correct plaque

hsean · May 27, 2008

i own a dremel and the more i think about it i'm thinking of carving out the letters i want on wood and trying my hand at stamping it on aluminum cut to size.alittle time consuming but nice little project.

Darkwriter77 · May 27, 2008

Cobra plaque - the white film that forms on a snake's fangs from eating fatty mice.

Hmmmm ... get a spare plaque, grind/sand it flat, and paint on or engrave your own logo, perhaps? Or get a piece of billet aluminum, cut to size/shape, drill your mount holes, and do the same with that?

Mustang5L5 · May 27, 2008

stykthyn said:
be prepared to pay about 100 or more for a correct plaque

Is that what they are going for now/?

BK_CAULEY · May 27, 2008

Mustang5L5 said:
Is that what they are going for now/?

half that

http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-9434B++++++1&comp=LRS

stykthyn · May 27, 2008

last I looked an actual cobra plaque (93-95) was listing at close to 100 on the 'bay. If LRS had one back then I didnt see it.

Mustang5L5 · May 27, 2008

Only 93 used the decal/plaque

94-95 had it cast into the manifold

Turkey Sammich · May 27, 2008

I need another "HO" plaque. Those prices are outrageous

impulse001 · May 27, 2008

They're back! This is a Ford Licenced, High Quality reproduction of the original plaque used on the 1993 Cobra upper intake. Aluminum plate with adhesive.

Adhesive? That sucks, the 5.0 H.O.'s are screwed in.

Darkwriter77 · May 27, 2008

Turkey Sammich said:
I need another "HO" plaque. Those prices are outrageous

Want the one off my '86 GT before I get rid of it?

Turkey Sammich · May 27, 2008

Trade it out wif teh one in teh notch and send that one to me? Franky will never noes

hsean · May 27, 2008

Darkwriter77 said:
Want the one off my '86 GT before I get rid of it?

i think these were the best looking for our cars and i have one and when i sized it up it is a little short.i figured i cut the sides to fit but i have seen the prices on eBay and they are outrageous.

Darkwriter77 · May 27, 2008

hsean said:
i think these were the best looking for our cars and i have one and when i sized it up it is a little short.i figured i cut the sides to fit but i have seen the prices on eBay and they are outrageous.

Eh ... I dunno how. The only difference between the HO, non-HO, and '86 intakes was the internals; externally, they look almost exactly identical. Now you've got me curious. I'll have to take the plaque off my '86 and lay it over the one on her notch or Capri notch just to see if it's the same size.

BK_CAULEY · May 27, 2008

Sammich i got a few of those things dude? whats wrong with yours? if oyu dont have one pm me. i have like 4 of them.

stykthyn · May 27, 2008

Mustang5L5 said:
Only 93 used the decal/plaque

94-95 had it cast into the manifold

now that I did not know. I always thought they had the same plate.

Mustang5L5 · May 27, 2008

I've got a sand-blasted HO plate kicking around. I figured every Mustang owner had 2 or 3 of these

Turkey Sammich · May 27, 2008

BK_CAULEY said:
Sammich i got a few of those things dude? whats wrong with yours? if oyu dont have one pm me. i have like 4 of them.

I guess I could always try pulling one from the yard, or we can discuss it further in pm's if you have one that isn't tore up.

Mustang5L5 · May 27, 2008

That's not exactly a factory OEM plate.

It's aftermarket

cobra plaque

hsean

5.0Droptop

...all those nights we shared, and you're a dude??

stykthyn

I want to measure mine. It doesn't look that tall.

hsean

Darkwriter77

Resident Ranting Negative Nancy

Mustang5L5

That is…until I whipped out my Bissell

BK_CAULEY

it's built for speed not longevity, woman

stykthyn

I want to measure mine. It doesn't look that tall.

Mustang5L5

That is…until I whipped out my Bissell

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle

impulse001

New Member

Darkwriter77

Resident Ranting Negative Nancy

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle

hsean

Darkwriter77

Resident Ranting Negative Nancy

BK_CAULEY

it's built for speed not longevity, woman

stykthyn

I want to measure mine. It doesn't look that tall.

Mustang5L5

That is…until I whipped out my Bissell

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle

Mustang5L5

That is…until I whipped out my Bissell

Similar threads

cobra plaque

...all those nights we shared, and you're a dude??

I want to measure mine. It doesn't look that tall.

Resident Ranting Negative Nancy

That is…until I whipped out my Bissell

it's built for speed not longevity, woman

I want to measure mine. It doesn't look that tall.

That is…until I whipped out my Bissell

I can't fap normal. I cracked a rib, then my ankle

New Member

Resident Ranting Negative Nancy

I can't fap normal. I cracked a rib, then my ankle

Resident Ranting Negative Nancy

it's built for speed not longevity, woman

I want to measure mine. It doesn't look that tall.

That is…until I whipped out my Bissell

I can't fap normal. I cracked a rib, then my ankle

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency