Cobra R Intake Manifold

I thought the Cobra R intake was for a 351? good luck finding one of those

Your best bet may be to get a lower from a gen1 lighting as they ran a 351 with gt40 heads and intake. The upper is a tube style on the gen1...but if you can get the lower and find a 94-95 cobra gt40 upper it will be the exact same thing as the factory 95 R intake.

The lower is going to be the big issue though...check out www.nloc.net.

i just saw the R part...but i would still stick with looking on corral and on ebay...you see them every once and a while...of course people ask a little bit more for them though... Good Luck

SPOOLIN5.0 said:

I am putting a 408 in the car, wanted it to look stock. Thanks for the info.

Click to expand...

One quick and simple glance at the area below the dizzy

and

You see right off the bat ..... This guy's got a Windsor

Do you hang with Chevy Boy's
or
Not all that bright Ford guys

Who are you tryin to fool?

Grady

on a 408 that is obv. not stock...I would just get a Edlb. or Trick flow intake.

Cheaper and better suited for the combo more than likely.

ya its exactly the same as the 94-95 cobra intake except it says 5.8L COBRA.

That would be pretty sick to see when you pop the hood.