cobra r intake questions

B

bamfponys

New Member

Jun 27, 2007

21

0

0

Richmond Va

Jul 1, 2007

#1

• Jul 1, 2007

• #1

I have just installed the lower part of the intake and letting it sit over night, i am hoping that it will not leak at all so i dont have to tear everything off again. But i do have a couple of questions i need two more bolts for the middle of the intake manifold. The longest bolts i have found are six inches and it looks like i might need a another half inch for the bolts in the middle. I was wondering if i was just better off getting that one inch spacer for the intake since it comes with new bolts. And i was also wondering if any of you guys had some real good detailed pictures of where all the vac lines go. What lines i should plug and what lines i need to keep. Any good details or pics would makes things a little bit easier on me.

Thank you
Troy

 

DMAN302

My mom says thanks for the pearl necklace.

Nov 8, 2003

2,120

2

59

windsor, Canada

Jul 1, 2007

#2

• Jul 1, 2007

• #2

vac lines...one to the vac tree, one to the pcv valve, one to the charcoal canister, one to the fuel regulator. Basically that's all that's needed, use the closest port to each item to provide vac to the components mentioned and you're golden.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,236

17,921

224

Massachusetts

Jul 1, 2007

#3

• Jul 1, 2007

• #3

 

B

bamfponys

New Member

Jun 27, 2007

21

0

0

Richmond Va

Jul 2, 2007

#4

• Jul 2, 2007

• #4

Thank you guys for the info now what do you think about that one inch spacer the only reason why i ask is cause i need two bolts for the center of the intake and i cant find a bolt long enough and the one inch spacers comes with new bolts?


Thank you
Troy

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,236

17,921

224

Massachusetts

Jul 2, 2007

#5

• Jul 2, 2007

• #5

If you have a stock hood, the intake won't clear with a 1" spacer


Go to a mom and pop type of hardware store and see what they have for hardware. Big chain stores don't carry them but the little shops do sometimes

 

98BLKGT

Founding Member

Dec 23, 2001

322

1

0

Chicago area

Jul 2, 2007

#6

• Jul 2, 2007

• #6

Why does the PCV connect to two different spots in the intake?

 

joncash

just high enough to be functional

Founding Member

Dec 9, 2000

756

4

39

The USA's peen

Jul 2, 2007

#7

• Jul 2, 2007

• #7

Mustang5L5 said:

If you have a stock hood, the intake won't clear with a 1" spacer


Go to a mom and pop type of hardware store and see what they have for hardware. Big chain stores don't carry them but the little shops do sometimes

Click to expand...

Just FYI: I managed to find the right length bolts for my Cobra upper at Lowe's, but the mom and pop places are better if you can still find one that hasn't been run out of business.

 

B

bamfponys

New Member

Jun 27, 2007

21

0

0

Richmond Va

Jul 2, 2007

#8

• Jul 2, 2007

• #8

i have plenty of room i have 3 inch hood. Lowes is about the only place i havnt checked. But i have checked at places where thats the only thing they carry and they dont have a flanged bolt that long, am i right that the two in the middle are longer? And in the picture it shows a hose going from the pvc to a T and goes back to the back part of the intake, is the T part really needed?

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,236

17,921

224

Massachusetts

Jul 2, 2007

#9

• Jul 2, 2007

• #9

Yes, you should do the t. I had the reason explained to me a long time ago why you hooked the PCV up in two spots but the reason escapes me. I would try to replicate the pic as much as you can

 

B

bamfponys

New Member

Jun 27, 2007

21

0

0

Richmond Va

Jul 2, 2007

#10

• Jul 2, 2007

• #10

well i have tired everywhere to get the hoses for all that and cant seem to find them anywhere. i guess i should try ford again for some parts, but i didnt think they would carry stuff for that old of a model

 

B

bamfponys

New Member

Jun 27, 2007

21

0

0

Richmond Va

Jul 3, 2007

#11

• Jul 3, 2007

• #11

well i found some seven inch bolts and also found a spacer in a store today. So those are on. the car starts but it is making a funny popping noise sometimes when i give it gas. it also started smokings and there was strong order coming from the passenger side

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,236

17,921

224

Massachusetts

Jul 3, 2007

#12

• Jul 3, 2007

• #12

vacuum leak?? Does it idle smooth?

 

E

ebk06

Member

Feb 23, 2007

113

12

18

Jul 3, 2007

#13

• Jul 3, 2007

• #13

Yea im thinking vacuum leak or you didnt properly torque all the bolts.

 

B

bamfponys

New Member

Jun 27, 2007

21

0

0

Richmond Va

Jul 4, 2007

#14

• Jul 4, 2007

• #14

well all the bolts are torqued down and the only sound i hear is from my K&N filter it only pops once and a while mainly when it gets up to 2000 or 3000 i havnt pushed the gas that hard yet. but as far as the smell could it just be the silicon i just for the back of the block?

 

cenok is family

15 Year Member

Jun 25, 2003

1,409

69

79

Norman, Ok

Jul 4, 2007

#15

• Jul 4, 2007

• #15

lowes has 7" bolts!? i just put this intake on too and i looked EVERYWHERE but lowes for those bolts...i went to home depot and they didn't have them so i figured lowes wouldnt. i ended up just getting some all thread and making my own studs.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,236

17,921

224

Massachusetts

Jul 4, 2007

#16

• Jul 4, 2007

• #16

Well the smell could be from the fresh RTV. I always get a smell when i put on a water pump or lower intake or exhaust part or something.

Get a can of carb cleaner and spray around the intake while the engine runs. If the idle increases, you have a vac leak

 

B

bamfponys

New Member

Jun 27, 2007

21

0

0

Richmond Va

Jul 5, 2007

#17

• Jul 5, 2007

• #17

yea i didnt think that lowes would have those bolt either but i went over there and found some. Could the smoking be from the RTV too, it is weird cause it only comes from the back of the motor. well i guess i will go out and get some carb cleaner and try to find the leak that way. It just puzzles me that a poping noise could be from a vacum leak. the popping noise seems like it is coming from the drivers side. Could it be the spark plugs makeing the noise if they were not gapped right?

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,236

17,921

224

Massachusetts

Jul 5, 2007

#18

• Jul 5, 2007

• #18

Does it smell sweet? If so you have a coolant leak

 

B

bamfponys

New Member

Jun 27, 2007

21

0

0

Richmond Va

Jul 5, 2007

#19

• Jul 5, 2007

• #19

i wish it had a nicer smell to it but it doesnt. Good thing i guess is that the last two times i started it there was no smoke but i can still smell something.

 

B

bamfponys

New Member

Jun 27, 2007

21

0

0

Richmond Va

Jul 7, 2007

#20

• Jul 7, 2007

• #20

when i was driving the car to my buddies house last night i could still smell it i had taken out the plug by the distributor just so i could drive over to his house that i didnt have to hear the poping noise.