• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Cold Air Intake HELP!!!!

  • Thread starter Thread starter JT's StangGT
  • Start date Start date Jul 6, 2005
  • 1
  • 2
Next
1 of 2 Next Last
J

JT's StangGT

New Member
Apr 2, 2005
1
0
0
Jul 6, 2005
#1
  • Jul 6, 2005
  • #1
I just put 40 series flows on my 01 GT and I was thinking about adding a cold air intake system. Any suggestions???
I would like to get something that won't trip the C.E.L. and that could be easy to install, looking to spend less than $200
 
D

davidz

New Member
Jun 17, 2005
15
0
0
Jul 6, 2005
#2
  • Jul 6, 2005
  • #2
I heard the JLT intakes make good HP.
 
I

inferno9898

Member
May 17, 2003
249
1
18
Jul 6, 2005
#3
  • Jul 6, 2005
  • #3
unless you're the bling under the hood kind of guy, the money for a CAI could be better spent elsewhere. short shifter, pullies, some sort of chip are all good choices. best to just drop in a K&N if you are looking for better induction
 
A

Aerosi665

New Member
Apr 12, 2005
25
0
0
Tempe, Arizona
Jul 6, 2005
#4
  • Jul 6, 2005
  • #4
I would buy a JLT ram air intake (RAI), they always get extremely high reviews from everyone that buys them, and Tucker has awesome customer service.

http://www.jlttruecoldair.com/
 

RedBullitt

New Member
Jul 7, 2004
462
0
0
Morgantown WV
Jul 6, 2005
#5
  • Jul 6, 2005
  • #5
well if you want a cold air, get a densecharger, aka tunable induction at demolet.com, or like he said jlt. they should not trip the light, but hp will be minimal on a NA car, as with any cai intake. i would spend the money on gears, 410 or 373
 
T

Torinalth

Founding Member
Jul 16, 2002
952
0
16
Clayton NC
Jul 6, 2005
#6
  • Jul 6, 2005
  • #6
hot rod U did a comparison of the JLT and Demolet, and the Demolet came out a good Bit ahead. i have the Demolet and love it, then was later reassured in my choice when i saw the writeup.

Torinalth
 
J

jocko

Member
Oct 1, 2003
62
0
6
miami fl
Jul 6, 2005
#7
  • Jul 6, 2005
  • #7
i just ran .20 faster at the track against another stang with a chrome or polished looking cold air intake, not sure about the brand but the filter was in the fender and i got a drop in k&n with no silencer and removed headlight but it could of been the driver also.
 
I

inferno9898

Member
May 17, 2003
249
1
18
Jul 6, 2005
#8
  • Jul 6, 2005
  • #8
jocko said:
i just ran .20 faster at the track against another stang with a chrome or polished looking cold air intake not about the brand but the filter was in the fender and i got a drop in k&n with no silencer and removed headlight but it could of been the driver also.
Click to expand...

p-u-n-c-t-u-a-t-i-o-n
 

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Jul 6, 2005
#9
  • Jul 6, 2005
  • #9
jocko said:
i just ran .20 faster at the track against another stang with a chrome or polished looking cold air intake not about the brand but the filter was in the fender and i got a drop in k&n with no silencer and removed headlight but it could of been the driver also.
Click to expand...

I've done alot of testing at the track [more than 20 runs trying different CAI's] and the Mac CAI was about the same as stock. With the snorkle removed from the stock air box, the times did indeed dip slightly lower than with the Mac CAI.
 

MaxedGT

Member
Mar 31, 2005
304
0
17
Surrey BC Canada
Jul 7, 2005
#10
  • Jul 7, 2005
  • #10
jocko said:
i just ran .20 faster at the track against another stang with a chrome or polished looking cold air intake not about the brand but the filter was in the fender and i got a drop in k&n with no silencer and removed headlight but it could of been the driver also.
Click to expand...
I've had the same type of results. CAI is a waste of money. Removing the headlight at the track, I've ran almost .2 quicker. Tested on two seperate occasions. For the steet, on a hot day, CAI, in the fender, might help, But racing pulling the headlight with no silencer works great.
 

cobra2798

New Member
Mar 30, 2005
303
2
0
Clermont, Florida
Jul 7, 2005
#11
  • Jul 7, 2005
  • #11
Anything other than the BBK or MAC , they just look good but JTL,K&N, Steeda will give u a few ponies, Getting rid of my BBK , the wife is gonna get me a JTL painted to match the car for christmas along with a few other goodies
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Jul 7, 2005
#12
  • Jul 7, 2005
  • #12
I have the K&N FIPK system on my car. I wouldn't have anything else. It works great and looks good. Plastic is great in the sense it doesn't rise to the heat levels of metal intakes, like those from Mac and BBK. Trinity_GT picked up 9.3rwhp and I believe 6+rwtq on a dyno jet with the addition of the K&N FIPK system on a midly modded GT. Definately amongst the best out there.
 

rebelleader

New Member
Mar 18, 2003
185
0
0
Homer Glen, Il
Jul 7, 2005
#13
  • Jul 7, 2005
  • #13
Try www.procarparts.com and seasrch for Mustang stuff. I got mine from them for about $100. Performance gains are difficult to tell, but it improves the growl of the engine. Makes an otherwise stock car sound pretty mean
 
J

JLTucker

Member
May 25, 2004
114
0
16
Chesapeake VA
Jul 7, 2005
#14
  • Jul 7, 2005
  • #14
Torinalth said:
hot rod U did a comparison of the JLT and Demolet, and the Demolet came out a good Bit ahead. i have the Demolet and love it, then was later reassured in my choice when i saw the writeup.

Torinalth
Click to expand...
This was on a 03 cobra, not a GT.
Plus there were way too many "testing odditys" on this comparo.
Once you find one thing wrong in a test I don't buy the rest.
 
P

page90lx

New Member
Jun 27, 2005
15
0
0
dover tn
Jul 7, 2005
#15
  • Jul 7, 2005
  • #15
I Have Had Great Luck With Densacharger On My Last 2 Mustangs Its Not Bright And Shiny But It Does Work!!!!!!!!!!!
 

StangPro

New Member
Sep 30, 2004
441
0
0
Roseville, MI
Jul 7, 2005
#16
  • Jul 7, 2005
  • #16
You can get DeMolet systems custom painted now, so it could be nice and shiny and make good power too.

Do the math.
$40 for a 1-2 hp drop in junk k&n
$150 for 8+hp with a JLT or DeMolet.
We got 8 with just the meter forward on a stock Bullitt, and more on our '04 GT that already had a drop-in junk filter.

Do your research and you'll see those are the only two choices that are proven time and time again to make power.
 

SRT Handz

I tripped & fell down and cut myself & got blood
Oct 10, 2004
941
23
19
La Mirada, CA
Jul 7, 2005
#17
  • Jul 7, 2005
  • #17
i am buying the MRT cold air this month
 
U

UhadMEatGT

New Member
Apr 2, 2005
117
0
0
Jul 7, 2005
#18
  • Jul 7, 2005
  • #18
A good intake will work, more air in, more air out. It will also give a nice tone under the hood and to the exhaust. Guys will blow money on pullies and other things that may net them 2-3HP. But when spending the same or less on a good intake that should give them 5+HP gains such as K&N or AEM its a waste of money? Is a shifter going to make you fast? Whats hurting performance on the intake is the ribbed area from the filter to the TB. I would say one of the best results I had was taking a K&N FIPK upper piece (from the TB to the intake box) on my truck and mating it to my stock air box with a drop in K&N. I didnt remove the snorkel because it is actually creating a vacuum only pulling in cold air from behind my headlight. It gave me better results than a full K&N system. I think the HP increases are not going to be by themselves but in a combination with a good TB and plenum and exhuast. I just think its retarded to leave a stock intake and then upgrade your TB and plenum to a little bit larger and smoother than stock which is exactly what you are doing by replacing your intake!
 
S

svtpower

New Member
Apr 30, 2005
257
0
0
Wisconsin
Jul 7, 2005
#19
  • Jul 7, 2005
  • #19
Intake

I can tell you I have done a cold air intake on every Mustang I have ever owned. On all 3 it made my exhaust louder and improved throttle response. As far as horsepower...dont expect huge gains by cai alone. If you are planning on doing a catback or other exhaust mods though THEY WORK TOGETHER. Bolt-ons are not going to add huge gains alone, adding 4 or 5 mods that gain 5 or 6 hp each is a nice boost though!
I have had both a Densecharger and a WMS ceramic coated Velocity. I prefer the look and design of the Velocity (which is on my current stang) but it's pricey. I got mine CHEAP on Ebay or I prolly woulda went Densecharger for the price. There is a pic of it in my garage if you want to see what it looks like.

edit: I dunno wtf happend to the member garages?
 

CanadaStang

New Member
Sep 7, 2003
2,093
1
0
Mb
Jul 7, 2005
#20
  • Jul 7, 2005
  • #20
StangPro said:
You can get DeMolet systems custom painted now, so it could be nice and shiny and make good power too.

Do the math.
$40 for a 1-2 hp drop in junk k&n
$150 for 8+hp with a JLT or DeMolet.
We got 8 with just the meter forward on a stock Bullitt, and more on our '04 GT that already had a drop-in junk filter.

Do your research and you'll see those are the only two choices that are proven time and time again to make power.
Click to expand...

Ummm....MM&FF dyno tested before and after just removing the snorkle and produced a 4.5 HP gain.http://musclemustangfastfords.com/tech/0205mmff_boltons/
So actually, if the JLT produces 8hp as you claim, then you are really only gaining 3.5HP over the stock airbox with the snorkle removed.
So doing the math, as you suggest:
$0.00 for 4.5HP increase with snorkle removal
$150.00 for 3.5HP JLT or DeMolet over stock/with no snorkle
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
181
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
331
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
M
Help! 2003 GT misfire when hot
  • Modular03
  • Feb 10, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
614
SN95 4.6L Mustang Tech Feb 13, 2026
Mustang5L5
T
Cold air intake 1990 GT
  • Tom77
  • Nov 22, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
17
Views
768
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 30, 2024
FastDriver
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
163
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?