complete 86 efi set up,gt-40 intake,injectors,ect...

J

johnsplowing207

New Member

Mar 1, 2010

99

0

0

sanford maine

Apr 20, 2010

#1

• Apr 20, 2010

• #1

converting to carb,will take trades on hei distributor,carb intake manifold, edlebrock carb,5-9psi fuel regulator.
I have the speed density computer,gt-40 explorer upper and lower intake,explorer fuel injectors,stock 86 mustang fuel rail with regulator, stock 86 distributor,70mm egr delete plate,stock TB and sensors,k&n CAI,,,,make cash offers or trades.

 

korywiesner

New Member

Sep 28, 2007

15

1

0

Gray, tn

Apr 26, 2010

#2

• Apr 26, 2010

• #2

I got trades

Brand new in box HEI Dizzy Procomp. One wire hookup w/ adjustable vacuum advance. Also have edelbrock performer 289 intake and I am not sure of the model but I do have a mechanical FPR with gauge. I am not using these because my fox is being set up for injection.

One question......Do you have the harness and MAP sensor from the 86 mustang also? If so I would be real interested in trading...


Where are you located?

 

J

johnsplowing207

New Member

Mar 1, 2010

99

0

0

sanford maine

Apr 26, 2010

#3

• Apr 26, 2010

• #3

I do have the map sensor but no wiring harness(it was cut)

 

korywiesner

New Member

Sep 28, 2007

15

1

0

Gray, tn

Apr 26, 2010

#4

• Apr 26, 2010

• #4

How bad is cut? Do you have both sides of the cut harness? Was it chopped up bad? Can it reasonably be soldered back together?

 

korywiesner

New Member

Sep 28, 2007

15

1

0

Gray, tn

Apr 26, 2010

#5

• Apr 26, 2010

• #5

You have a PM.

 

J

johnsplowing207

New Member

Mar 1, 2010

99

0

0

sanford maine

Apr 26, 2010

#6

• Apr 26, 2010

• #6

computer and fuel injection harness were sold and the other wiring was throug out

 

korywiesner

New Member

Sep 28, 2007

15

1

0

Gray, tn

Apr 26, 2010

#7

• Apr 26, 2010

• #7

If you are interested, I will be glad to swap the FPR w/Guage, HEI dist and the Edelbrock intake for your upper and lower intakes, TB, Delete....I'll even take that CAI off your hands.

BTW the FPR is Holley P/N 34R-6657B along with mounting bracket. The Gauge is a Mr. gasket 0 - 15 PSI

Dist is Procomp HEI for 302.

Let me know.

 

J

johnsplowing207

New Member

Mar 1, 2010

99

0

0

sanford maine

Apr 26, 2010

#8

• Apr 26, 2010

• #8

email me
johnsplowing207@yahoo.com
do you happen to have a throttle cable for a carb. application?

 

korywiesner

New Member

Sep 28, 2007

15

1

0

Gray, tn

Apr 26, 2010

#9

• Apr 26, 2010

• #9

E-Mail Sent

 

A

autosay97

New Member

Apr 21, 2005

7

0

1

Apr 29, 2010

#10

• Apr 29, 2010

• #10

Interested in the tubular intake, email me at autosay97@yahoo.com with a shipped price to 31503 GA.